短い時間に最も小さな努力で一番効果的にHPのHP0-J12試験の準備をしたいのなら、IT-Passports.comのHPのHP0-J12試験トレーニング資料を利用することができます。IT-Passports.comのトレーニング資料は実践の検証に合格すたもので、多くの受験生に証明された１００パーセントの成功率を持っている資料です。IT-Passports.comを利用したら、あなたは自分の目標を達成することができ、最良の結果を得ます。
HPのHP0-J12試験の準備をしていたら、IT-Passports.comは貴方が夢を実現することにヘルプを与えます。 IT-Passports.comのHPのHP0-J12試験トレーニング資料は高品質のトレーニング資料で、１００パーセントの合格率を保証できます。もしあなたが適当な時間を持って勉強できるのなら、IT-Passports.comのHPのHP0-J12試験トレーニング資料を選びましょう。この資料を手に入れたら、楽に試験の準備をすることができます。
試験番号：HP0-J12問題集
試験科目：HP 「Supporting ESL E-Series and EML E-Series Libraries」
問題と解答：全119問
長年にわたり、IT-Passports.comはずっとIT認定試験を受験する皆さんに最良かつ最も信頼できる参考資料を提供するために取り組んでいます。IT認定試験の出題範囲に対して、IT-Passports.comは豊富な経験を持っています。また、IT-Passports.comは数え切れない受験生を助け、皆さんの信頼と称賛を得ました。ですから、IT-Passports.comのHP0-J12問題集の品質を疑わないでください。これは間違いなくあなたがHP0-J12認定試験に合格することを保証できる問題集です。IT-Passports.comは試験に失敗すれば全額返金を保証します。このような保証があれば、IT-Passports.comのHP0-J12問題集を購入しようか購入するまいかと躊躇する必要は全くないです。この問題集をミスすればあなたの大きな損失ですよ。
IT-Passports.comの商品はIT業界の専門家が自分の豊かな知識と経験を利用して認証試験に対して研究出たので品質がいいの試験の資料でございます。受験者がIT-Passports.comを選択したら高度専門の試験に１００％合格することが問題にならないと保証いたします。
現在のこの社会の中で、優秀な人材が揃って、IT人材も多く、競争もとてもはげしくて、だから多くのIT者はIT認証試験に参加してIT業界での地位のために奮闘して、HP0-J12試験はHPの一つ重要な認証試験で、多くの人がHP認証されたくて試験に合格しなければなりません。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/HP0-J12.html
NO.1 What are the main considerations when choosing a location for an EML E-Series tape library? (Select
three.)
A.floor space
B.room height
C.power requirements
D.lighting requirements
E.grounding requirements
F.distance to disk storage
Answer: ACE
HP認定証 HP0-J12 HP0-J12 HP0-J12認証試験
NO.2 What is important to remember when changing from Manual to Automatic mode of the Interface
Manager of an ESL E-Series tape library?
A.All drives must be taken offline.
B.Fibre Channel cables must be unplugged.
C.Interface Controllers must be powered off first.
D.Any customizations created in Manual mode will be lost.
Answer: D
HP HP0-J12認証試験 HP0-J12 HP0-J12認定証 HP0-J12過去問
NO.3 What does the cabinet controller assembly of an ESL E-Series tape library provide a SCSI interface
to?
A.tape devices
B.library robotics
C.management interface card
D.e2400-160 Interface Controller
Answer: B
HP HP0-J12過去問 HP0-J12認定証 HP0-J12練習問題 HP0-J12問題集 HP0-J12
NO.4 Which tape device attribute does the ESL E-Series tape library Interface Manager use to determine
the physical location of each tape drive in the library?
A.bus number
B.SCSI address
C.serial number
D.drive slot position
Answer: C
HP参考書 HP0-J12認定証 HP0-J12認定証 HP0-J12認定資格 HP0-J12
NO.5 What is the hard wired IP address of the Interface Manager card in an EML E-Series tape library on the
private network?
A.1.1.1.1
B.10.0.0.1
C.192.168.2.1
D.155.155.155.1
Answer: C
HP認証試験 HP0-J12 HP0-J12過去問 HP0-J12認定証
NO.6 What can you do to speed up the power-on process while troubleshooting an EML 71e library?
A.Remove all media from the library.
B.Power-on the library with the load port door open.
C.Disable the auto audit, remembering to re-enable it and reboot the library before leaving the customer
site.
D.Configure inventory mode to bar code labels not required, remembering to reset bar code labels
required before leaving the customer site.
Answer: C
HP HP0-J12 HP0-J12 HP0-J12過去問
NO.7 Which HP document provides the most current, supported configurations for Enterprise class libraries
in a SAN environment?
A.Service Guide
B.SAN Design Guide
C.EBS Compatibility Matrix
D.training course documentation
Answer: C
HP認証試験 HP0-J12練習問題 HP0-J12 HP0-J12過去問 HP0-J12認証試験
NO.8 What are the standard cabling requirements for the Interface Manager card of an EML E-Series tape
library?
A.4 x Ethernet to interface controllers, 1 x Ethernet to robotics controller, 1 x Ethernet to LAN
B.4 x Ethernet to interface controllers, 1 x Fibre Channel to robotics controller, 1 x Ethernet to LAN
C.4 x Fibre Channel to interface controllers, 1 x Ethernet to robotics controller, 1 x Ethernet to LAN
D.4 x Fibre Channel to interface controllers, 1 x Fibre Channel to robotics controller, 1 x Ethernet to LAN
Answer: A
HP HP0-J12認定証 HP0-J12認定試験 HP0-J12認証試験
NO.9 Which parts of the Extended Tape Library Architecture are SNIA compliant and support the Storage
Management Initiative Specifications (SMI-S)? (Select two.)
A.Secure Manager
B.Interface Manager
C.Interface Controller
D.Robotics Controller
E.Command View Tape Library
Answer: BE
HP過去問 HP0-J12認定証 HP0-J12問題集 HP0-J12
NO.10 How many cartridge slots can be used in an 8U drive expansion module mounted at the bottom of an
EML E-Series library?
A.48
B.87
C.94
D.103
Answer: B
HP認証試験 HP0-J12認証試験 HP0-J12認定試験 HP0-J12参考書 HP0-J12
NO.11 What must be configured in CommandView TL when manually adding an ESL E-Series library?
A.library IP address
B.library serial number
C.tape drive and robot SCSI IDs
D.Interface Manager user name and password
Answer: A
HP HP0-J12 HP0-J12練習問題 HP0-J12参考書 HP0-J12
NO.12 Click the Exhibit button.
Which ESL E-Series tape library component does the exhibit display?
A.cluster controller
B.cabinet controller
C.Interface Manager
D.Interface Controller
Answer: C
HP過去問 HP0-J12 HP0-J12 HP0-J12練習問題
NO.13 Click the Exhibit button.
What does Number 2 on the exhibit represent?
A.x axis motor
B.y axis motor
C.optical scanner
D.home position sensor
Answer: B
HP HP0-J12 HP0-J12練習問題 HP0-J12 HP0-J12 HP0-J12
NO.14 Click the Exhibit button.
What is the maximum supported number of drives that can be installed in a CLM configuration?
A.40
B.44
C.60
D.64
Answer: B
HP HP0-J12 HP0-J12練習問題 HP0-J12認定試験 HP0-J12
NO.15 Which statement about an EML E-Series library is correct?
A.It allows serverless backup with only a few configuration steps if a Secure Manager license is installed.
B.The initial configuration can be done over the front panel, Command View TL or the serial port on the
robotics controller using CLI.
C.It is fully compliant with the Storage Management Initiative Specifications (SMI-S) and can be
configured with HP Storage Essentials.
D.It bridges the capabilities and features between the business-class HP StorageWorks MSL Series and
enterprise-class ESL E-Series tape libraries.
Answer: D
HP HP0-J12練習問題 HP0-J12認定試験 HP0-J12問題集
NO.16 Which scheme is used in the Command Line Interface for drive and slot numbers in ESL E-Series
tape libraries?
A.0 based
B.1 based
C.2 based
D.Hex based
Answer: B
HP認証試験 HP0-J12認証試験 HP0-J12 HP0-J12認定資格 HP0-J12認定試験
NO.17 With which management specification does the Command View TL Provider comply?
A.Direct Management Initiative (DMI)
B.Advanced Remote Management (ARM)
C.Simple Network Management Protocol (SNMP)
D.Storage Management Initiative Specification (SMI-S)
Answer: D
HP認定証 HP0-J12認定資格 HP0-J12 HP0-J12 HP0-J12 HP0-J12過去問
NO.18 What are advantages of using Secure Manager EML? (Select two.)
A.It allows library partitioning.
B.Management of direct backup is allowed.
C.It provides faster access to tape devices.
D.Device level mapping is easily configured.
E.User access management is easily configured.
Answer: AD
HP HP0-J12 HP0-J12認証試験 HP0-J12認証試験 HP0-J12認定資格
NO.19 What are possible causes of inventory failure in ESL E-Series tape libraries? (Select two.)
A.The library has a drive failure.
B.One of the clusters is disconnected.
C.The library front is facing bright sunlight.
D.Unapproved bar code labels are being used.
E.The Interface Controller is disconnected from the Fibre Channel switch.
Answer: CD
HP HP0-J12 HP0-J12 HP0-J12
NO.20 Click the Exhibit button.
Which ESL E-Series tape library configuration is shown in the Operator Control Panel Library screen?
A.last cabinet
B.primary cabinet
C.secondary cabinet
D.stand-alone cabinet
Answer: B
HP HP0-J12 HP0-J12問題集 HP0-J12 HP0-J12
NO.21 When is Lock Element Addressing used in the ESL E-Series library?
A.with multiple tape drive clusters
B.as an electronic lock of the access doors
C.when multiple Interface Controllers are used
D.for cross-linked libraries with three or more cabinets
Answer: D
HP HP0-J12参考書 HP0-J12 HP0-J12
NO.22 What can be connected using the vacant Ethernet port on the right side of the cabinet controller in an
ESL E-Series tape library?
A.an external LAN
B.cluster controllers
C.interface management card
D.Fibre Channel interface controllers
Answer: A
HP HP0-J12 HP0-J12過去問 HP0-J12問題集 HP0-J12
NO.23 Click the Exhibit button.
Which component is connected to port E1 of the cluster controller if it is in drive cluster 0 of an ESL
E-Series tape library?
A.cabinet controller
B.Interface Controller
C.lower cluster controller
D.Interface Manager card
Tape Library
Answer: A
HP HP0-J12 HP0-J12
NO.24 For which connection, other than the cabinet controller, is the I2C network cable used in ESL E-Series
tape libraries?
A.external LANs
B.cluster controllers
C.interface management cards
D.Fibre Channel interface controllers
Answer: B
HP HP0-J12認証試験 HP0-J12過去問 HP0-J12
NO.25 What is the maximum cartridge slot count in an EML E-Series library?
A.325
B.470
C.505
D.595
Answer: C
HP HP0-J12認定証 HP0-J12
NO.26 What is reported by the LP/PNL sensor of an ESL E-Series tape library?
A.library door status
B.x-axis motor position
C.y-axis motor position
D.magazines and load ports status
Answer: D
HP問題集 HP0-J12認定証 HP0-J12認定資格 HP0-J12問題集 HP0-J12 HP0-J12
NO.27 How often is the CommandView TL Health Summary screen updated?
A.every 30 seconds
B.at 15-minute intervals
C.whenever the library status changes
D.configurable to any value up to 900 seconds
Answer: C
HP HP0-J12 HP0-J12 HP0-J12
NO.28 What is the purpose of the Stop button on the Operator Control Panel of ESL E-Series tape libraries?
A.to halt the robotics
B.to restart the library
C.to shut down the library
D.to pause a running backup process
Answer: A
HP HP0-J12練習問題 HP0-J12 HP0-J12練習問題 HP0-J12認証試験
NO.29 Click the Exhibit button.
Which ESL E-Series tape library component (used to carry data cartridges to a secondary cabinet) is
shown in the figure?
A.CLM arm
B.CLM controller
C.picker assembly
D.cartridge transfer robot
Answer: A
HP参考書 HP0-J12 HP0-J12
NO.30 Click the Exhibit button.
In the exhibit, which item number represents the host Fibre Channel connections?
A.4
B.6
C.9
D.10
Answer: C
HP HP0-J12過去問 HP0-J12練習問題 HP0-J12
HPのHP0-J12の認定試験に合格すれば、就職機会が多くなります。IT-Passports.comはHPのHP0-J12の認定試験の受験生にとっても適合するサイトで、受験生に試験に関する情報を提供するだけでなく、試験の問題と解答をはっきり解説いたします。
没有评论:
发表评论