Alcatel-Lucentの4A0-101試験はIT領域で人気がある重要な試験です。我々はIT領域の人々にショートカットを提供するために、最高のスタディガイドと最高のオンラインサービスを用意して差し上げます。IT-Passports.comの Alcatel-Lucentの4A0-101試験問題集は全ての試験の内容と答案に含まれています。IT-Passports.comの模擬テストを利用したら、これはあなたがずっと全力を尽くてもらいたいもののことが分かって、しかもそれは正に試験の準備をすることを意識します。
4A0-101認定試験と言ったら、信頼できるのを無視することは難しい。IT-Passports.com の4A0-101試験トレーニング資料は特別にデザインしてできるだけあなたの仕事の効率を改善するのソフトです。IT-Passports.comは世界的にこの試験の合格率を最大限に高めることに力を尽くしています。
あなたの目標はとても高いですから、あなたに色々なヘルプをあげられる資料が必要です。IT-Passports.com Alcatel-Lucentの4A0-101試験問題集はあなたが自分の目標を達成することを助けられます。IT-Passports.com Alcatel-Lucentの4A0-101問題資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。当社の製品は、すべての可能性のある問題を試させられます。受験生の皆様に問題の１００パーセント真実な解答を提供することを保証します。
弊社が提供した部分の資料を試用してから、決断を下ろしてください。もし弊社を選ばれば、１００％の合格率を保証でございます。
試験番号：4A0-101問題集
試験科目：Alcatel-Lucent 「Alcatel-Lucent Interior Routing Protocols and High Availability」
問題と解答：全177問
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/4A0-101.html
NO.1 What is the default preference value for a static route in the Alcatel-Lucent 7750 SR?
A. 0
B. 5
C. 10
D. 15
Answer: B
Alcatel-Lucent練習問題 4A0-101認定試験 4A0-101認定試験
NO.2 Which of the following commands can be used to display the number of SPF computations that have
been performed on a router?
A. show router ospf area <area-id>
B. show router ospf neighbor
C. show router ospf interface
D. show router ospf status
Answer: A
Alcatel-Lucent 4A0-101練習問題 4A0-101
NO.3 In an IP datagram, which of the following fields identifies the receiving application?
A. The protocol field of the transport layer header.
B. The port field of the transport layer header.
C. The protocol field of the network layer header.
D. The port field of the network layer address.
Answer: B
Alcatel-Lucent問題集 4A0-101認定試験 4A0-101過去問
NO.4 Which of the following statements describe the major features of OSPF? Choose two answers.
A. Fast reroute capability
B. Control traffic prioritization
C. Route redistribution
D. Traffic engineering extensions
E. Cut through forwarding
Answer: C,D
Alcatel-Lucent 4A0-101 4A0-101
NO.5 When a router receives an IP packet, but does not find a match in the routing table for the destination IP
address, what actions are performed by the router?
A. The packet is flooded out all router interfaces.
B. The packet is dropped and an ICMP unreachable message is sent back to the source.
C. The packet is silently discarded.
D. The packet is flooded out all interfaces and an ICMP unreachable message is sent.
Answer: B
Alcatel-Lucent認定証 4A0-101 4A0-101認定証 4A0-101
NO.6 Static routing will be used in a network between a corporate head office, with many connected networks,
and a branch office, with one connection to the head office. Which of the following best describes the
likely configuration?
A. The corporate head office router will have a default route and the branch site will have a more specific
static route.
B. The corporate head office router and the branch office router will both have specific static routes.
C. The corporate head office router and the branch router will both have default routes.
D. The corporate head office router will have a more specific static route and the branch office router will
have a default route.
Answer: D
Alcatel-Lucent 4A0-101 4A0-101 4A0-101問題集 4A0-101
NO.7 Click the exhibit button.
What is the command to configure a static route on the Alcatel-Lucent 7750 SR router R1 to reach the
network behind router R2?
A. configure router static-route 139.120.121.0/24 next-hop 138.120.199.2
B. configure router static-route 139.120.121.0/24 next-hop 138.120.199.1
C. configure router static-route 138.120.199.2/24 next-hop 138.120.199.1
D. configure router static-route 139.120.121.0/24 next-hop 139.120.121.2
Answer: A
Alcatel-Lucent 4A0-101 4A0-101練習問題
NO.8 Click the exhibit button.
What can you deduce from the show command on router R6?
A. The router R6 interface is in a multi-access segment. It is neither the DR nor the BDR for the segment.
The DR for this segment would be the router with router ID 10.10.10.5.
B. The router R6 interface is in a multi-access segment. It is neither the DR nor the BDR for the segment;
however, this command does not indicate whether 10.10.10.3 or 10.10.10.5 is the DR or BDR.
C. The router R6 interface is in a multi-access segment. It is the BDR, which is why it is not adjacent to the
other routers.
D. The router R6 interface is in a multi-access segment. It is neither the DR nor the BDR for the segment.
The DR for this segment would be the router with router ID 10.10.10.3.
Answer: B
Alcatel-Lucent認証試験 4A0-101 4A0-101
NO.9 Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. Assuming that
there are no stub networks, which of the following statements regarding type 4 LSA generation is true?
A. Router R1 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
B. Router R3 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
C. Router R3 generates a type 4 LSA that is flooded to areas 0 and 2.
D. Router R3 generates a type 4 LSA that is flooded to area 0, and router R6 generates a type 4 LSA that
is flooded to area 2.
Answer: D
Alcatel-Lucent問題集 4A0-101 4A0-101 4A0-101認定試験
NO.10 Which of the following statements regarding distance vectors protocols are true.?
(Choose two answers).
A. RIPvl, RIPv2, and BGP are distance vector protocols.
B. OSPF and IS-IS are distance vector protocols.
C. Routing tables are exchanged between neighbors; however, no routing table is transmitted beyond the
immediate neighbor.
D. Distance vector protocols use the Dijkstra SPF algorithm.
E. Routers that participate in distance vector routing protocols maintain full knowledge of distant routers
and how they interconnect
Answer: A
Alcatel-Lucent 4A0-101認定試験 4A0-101
NO.11 Click the exhibit button.
Routers R1 R2, and R3 are running a classful routing protocol between them. Assuming that router R1
advertises all directly connected networks, how will these networks be represented in router R3's routing
table?
A. Router R3's routing table can only contain one of the routes, which will result in route flapping.
B. Router R3's routing table will have one entry for 10.1.1.0/24 and one entry for 10.1.2.0/24.
C. The networks will be represented with one entry of 10.0.0.0/8 in router R3's routing table.
D. The networks will be represented with one entry of 10.0.0.0/24 in router R3's route table.
Answer: C
Alcatel-Lucent 4A0-101認定試験 4A0-101 4A0-101 4A0-101 4A0-101認定資格
NO.12 What causes an adjacency to change from down to two ways?
A. When a link state update is received in response to a link state request.
B. When a router receives a Hello packet that contains its own router ID in the neighbor list from a
neighbor.
C. When a router receives a database description packet from a neighbor.
D. When a link state acknowledgement is received in response to a link state update.
Answer: B
Alcatel-Lucent練習問題 4A0-101 4A0-101
NO.13 Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. How many
type 4 LSAs will be present in the network?
A. One.
B. One for each of the routers in area 0
C. One for each of the external routes exported by router R1.
D. Type 4 LSAs are not generated in this network topology.
Answer: D
Alcatel-Lucent 4A0-101 4A0-101 4A0-101練習問題
NO.14 Which of the following conditions will prevent an OSPF adjacency from reaching the full state? Choose
three answers.
A. MTU mismatch
B. Incorrect subnet mask
C. System interface not included in OSPF
D. Area ID not the same
E. Different metric set on each end of the link
F. Router ID not defined
Answer: A,B,D
Alcatel-Lucent 4A0-101認証試験 4A0-101認証試験
NO.15 There is an IP host with IP address 10.2.3.1. A static route is created, using the "configure router
static-route 10.2.3.0/24 next-hop 10.1.2.1" command. What is the correct traceroute command to test this
static route on an Alcatel-Lucent 7750 SR?
A. traceroute 10.2.3.1
B. traceroute 10.2.3.1 next-hop 10.1.2.1
C. traceroute next-hop 10.1.2.1
D. traceroute does not work on the Alcatel-Lucent 7750 SR.
E. traceroute 10.1.2.1
Answer: A
Alcatel-Lucent 4A0-101認定試験 4A0-101 4A0-101認定資格 4A0-101 4A0-101
NO.16 Click the exhibit button.
The following command sequence is executed on router R2:
A:R2# configure router ospf router-id 10.10.10.99
A:R2# configure router router-id 10.10.10.66
On router R1, what router ID appears for router R2 directly after these commands are executed?
A. 10.10.10.99
B. 10.10.10.66
C. 10.10.10.2
D. 10.10.10.1
Answer: C
Alcatel-Lucent認定資格 4A0-101 4A0-101過去問 4A0-101参考書 4A0-101過去問 4A0-101問題集
NO.17 Click the exhibit button.
A static route is created on router R1 using the "static-route 0.0.0.0/0 next-hop 10.3.3.2"
command. What command can be used to test the static route on an Alcatel-Lucent 7750 SR?
A. ping static 10.5.5.5
B. ping static 0.0.0.0/0
C. ping 10.5.5.5
D. ping 0.0.0.0
Answer: C
Alcatel-Lucent 4A0-101 4A0-101 4A0-101 4A0-101問題集
NO.18 Click the exhibit button.
What triggers convergence of the routing protocol when the link between switch 1 and switch 2 goes
down?
A. Convergence is triggered when the adjacency between routers R1 and R2 drops as a result of Hello
timeouts. At this point, both routers R1 and R2 re-compute their link state database and send updates to
their adjacent routers. Once the process is complete for all routers, the networks have converged.
B. Convergence is triggered when the physical interfaces between routers R1 and R2 go down. At this
point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent
routers. Once the process is complete for all routers, the networks have converged.
C. Convergence will not be triggered because switches cannot run routing protocols between them.
D. Convergence is triggered when the switches notify the routers about the link state information. At this
point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent
routers. Once the process is complete for all routers, the networks have converged
E. Convergence is triggered when an LSA is sent from router R1 to router R2 to indicate that the link is
down. At this point, both routers R1 and R2 re-compute their link statedatabase and send updates to their
adjacent routers. Once the process is complete for all routers, the networks have converged.
Answer: A
Alcatel-Lucent問題集 4A0-101問題集 4A0-101 4A0-101過去問
NO.19 Which of the following statements apply to link state protocol behavior? Choose three answers.
A. Routers broadcast the entire route table to all neighbors.
B. Information about directly connected links is sent to all neighbors.
C. An adjacency database is maintained by each router.
D. The sequence number for an update is incremented as it is flooded from router to router.
E. The topological database is the same for all routers in a single area.
Answer: B,C
Alcatel-Lucent認定証 4A0-101 4A0-101練習問題 4A0-101
NO.20 What are the default Hello and Dead timer intervals for OSPF on the Alcatel-Lucent 7750 SR?
A. 5 and 15 seconds
B. 10 and 30 seconds
C. 5 and 20 seconds
D. 10 and 40 seconds
Answer: D
Alcatel-Lucent 4A0-101 4A0-101問題集 4A0-101認定資格 4A0-101認定証 4A0-101認定試験
今競争の激しいIT業界で地位を固めたいですが、Alcatel-Lucent 4A0-101認証試験に合格しなければなりません。IT業界ではさらに強くなるために強い専門知識が必要です。Alcatel-Lucent 4A0-101認証試験に合格することが簡単ではなくて、Alcatel-Lucent 4A0-101証明書は君にとってはIT業界に入るの一つの手づるになるかもしれません。しかし必ずしも大量の時間とエネルギーで復習しなくて、弊社が丹精にできあがった問題集を使って、試験なんて問題ではありません。
没有评论:
发表评论