最新のOracle 1Z0-478試験の問題集

インターネットで高品質かつ最新のOracleの1Z0-478の試験の資料を提供していると言うサイトがたくさんあります。が、サイトに相関する依頼できる保証が何一つありません。ここで私が言いたいのはIT-Passports.comのコアバリューです。すべてのOracleの1Z0-478試験は非常に重要ですが、こんな情報技術が急速に発展している時代に、IT-Passports.comはただその中の一つです。では、なぜ受験生たちはほとんどIT-Passports.comを選んだのですか。それはIT-Passports.comが提供した試験問題資料は絶対あなたが試験に合格することを保証しますから。なんでそうやって言ったのはIT-Passports.comが提供した試験問題資料は最新な資料ですから。それも受験生たちが実践を通して証明したことです。

Oracleの1Z0-478認定試験は人気があるIT認証に属するもので、野心家としてのIT専門家の念願です。このような受験生は1Z0-478認定試験で高い点数を取得して、自分の構成ファイルは市場の需要と互換性があるように充分な準備をするのは必要です。

あなたはIT職員ですか。今年で一番人気があるIT認証試験に申し込みましたか。もし「はい」と答えてくれたら、あなたはラッキですよ。IT-Passports.comのOracleの1Z0-478トレーニング資料はあなたが１００パーセント試験に合格することを保証しますから。これは絶対に真実なことです。IT業種でより高いレベルに行きたいのなら、IT-Passports.comを選ぶのは間違いなく選択です。当社のトレーニング資料はあなたが全てのIT認証試験に合格することを助けます。しかも値段が手頃です。信じないことはしないでください。IT-Passports.comを利用したら分かります。

Oracleの1Z0-478試験の準備をしていたら、IT-Passports.comは貴方が夢を実現することにヘルプを与えます。 IT-Passports.comのOracleの1Z0-478試験トレーニング資料は高品質のトレーニング資料で、１００パーセントの合格率を保証できます。もしあなたが適当な時間を持って勉強できるのなら、IT-Passports.comのOracleの1Z0-478試験トレーニング資料を選びましょう。この資料を手に入れたら、楽に試験の準備をすることができます。

試験番号：1Z0-478問題集

試験科目：Oracle 「Oracle SOA Suite 11g Essentials」

問題と解答：全75問

我々は受験生の皆様により高いスピードを持っているかつ効率的なサービスを提供することにずっと力を尽くしていますから、あなたが貴重な時間を節約することに助けを差し上げます。IT-Passports.com Oracleの1Z0-478試験問題集はあなたに問題と解答に含まれている大量なテストガイドを提供しています。インターネットで時勢に遅れない1Z0-478勉強資料を提供するというサイトがあるかもしれませんが、IT-Passports.comはあなたに高品質かつ最新のOracleの1Z0-478トレーニング資料を提供するユニークなサイトです。IT-Passports.comの勉強資料とOracleの1Z0-478に関する指導を従えば、初めてOracleの1Z0-478認定試験を受けるあなたでも一回で試験に合格することができます。

全てのIT専門人員はOracleの1Z0-478の認定試験をよく知っていて、その難しい試験に受かることを望んでいます。Oracleの1Z0-478の認定試験の認可を取ったら、あなたは望むキャリアを得ることができるようになります。IT-Passports.comのOracleの1Z0-478試験トレーニング資料を利用したら、望むことを取得できます。

IT-Passports.comの専門家チームがOracleの1Z0-478認定試験に彼らの自分の経験と知識を利用して絶えなく研究し続けています。IT-Passports.comが提供したOracleの1Z0-478試験問題と解答が真実の試験の練習問題と解答は最高の相似性があり、一年の無料オンラインの更新のサービスがあり、100%のパス率を保証して、もし試験に合格しないと、弊社は全額で返金いたします。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/1Z0-478.html

NO.1 When more than one policy is attached to a policy subject, the combination of policies needs
to be valid. Which statement is true about the valid combination of policies for a policy subject?
A. Only one MTOM policy can be attached to a policy subject.
B. More than one Reliable Messaging policy can be attached to a policy subject.
C. Both a Reliable Messaging policy and a WS-Addressing policy cannot be attached to the same
policy subject.
D. Only one security policy can be attached to a policy subject.
Answer: A

Oracle   1Z0-478   1Z0-478   1Z0-478
Explanation:
Note:
*Within a SOA composite application, you must attach the Oracle WS-MTOM policy to service and
reference binding components to receive and send MTOM (MIME binary) attachments within
Oracle SOA Suite.
*Message Transmission Optimization Mechanism (MTOM)
Ensures that attachments are in MTOM format. This format enables binary data to be sent to and
from web services. This reduces the transmission size on the wire.
*ReliabilityPolicy
Supports the WS-Reliable Messaging protocol. This guarantees the end-to-end delivery of
messages.
* Addressing Policy Verifies that simple object access protocol (SOAP) messages include
WS-Addressing headers in conformance with the WS-Addressing specification. Transport-level data
is included in the XML message rather than relying on the network-level transport to convey this
information.

NO.2 You expand a business rule component that a colleague added to the BPEL process. You see an
Assign element named Facts_To_Rule_Service.
Which statement is true bout this Assign element?
A. It was added automatically based on entries that your colleague made in the dialog box that
approved when the business rule component was added to the BPEL model.
B. Your colleague manually added this Assign element after adding the business rule component to
the BPEL Model.
C. This Assign element was automatically added when your colleague manually addedthe
corresponding Rule_Service_To_Facts assign to the BPEL model.
D. You can delete this Assign because it was created for documentation purposes only.
Answer: A

Oracle認定証   1Z0-478   1Z0-478   1Z0-478   1Z0-478
Explanation:
Note: *Facts_To_Rule_Service: Assigns the facts to a variable.

NO.3 A partner needs to access services that are defined in one of your Service Composite
Architecture (SCA) applications via a web service interface. Which approach (and accompanying
reasoning) describes a loosely coupled and robust solution?
A. Use Oracle Service Bus to provide an Interface layer over your SCA application. This enables you
to hide the locations of your SCA application, perform load-balancing across those endpoints, and
provide the ability to define service level agreements to help ensure that you are meeting your
contractual obligations to the partner.
B. Use the Mediator component to provide a web service interface to your SCA application. This
arrives you the flexibility of using the industry standard XSLT technology to perform translation and
transformations.
C. Use Oracle Service Bus to provide an interface layer over your SCA application. This enables you
to "skin" your SCA application with a web service interface and still provide a robust experience to
the partner.
D. Allow the partner simply to connect directly to the SCA application. This provides the best
performance and helps keep the partner happy.
Answer: B

Oracle認定証   1Z0-478   1Z0-478

NO.4 Which two approaches are valid when using dynamic partner links in a BPEL process?
A. A WSDL file, which contains multiple services that use the same portType, is available at design
time, but the decision to determine which service is used can only be made at runtime.
B. When the BPEL process is designed, the endpoint URL of the WSDL file is known but the services
and port types are not known.
C. When the BPEL process is designed, the services and port types of the WSDL file are known but
the endpoint URI is not known.
D. A WSDL file, which contains multiple services that use different portTypes, is available at design
time, but the decision to determine which server us used can only be made at runtime.
Answer: A,C

Oracle   1Z0-478   1Z0-478
Explanation:
A (not D):How To Create a Dynamic Partner Link at Design Time for Use at Runtime
To create a dynamic partner link at design time for use at runtime:
etc
C (not B):The BPEL specification mandates that only the partner endpoint reference (EPR) can be
changed dynamically. In BPEL terms, only the partnerRole of a partner link element can have a new
value assigned. The myRole value doesn't change after the BPEL has been deployed.
Note: *Dynamic Partner Links and Dynamic Addressing During the design-time of an application,
you may need to configure certain services whose endpoints (addresses) are not known beforehand,
or it may be necessary to change an endpoint reference while the application is running. The
Dynamic Partner link feature allows you to dynamically assign an endpoint reference to the partner
link. This means that you can use onepartner link for subsequent calls to different web-services
(provided that the services use the same interface). *For successful deployment of the process, a
partner link should be completely defined. When you deploy the project, the WSDL file for the
partner link should contain and define both the abstract and the concrete information for the
partner link, including address and port, though later the concrete information can be changed
independently from the WSDL file.

NO.5 Composite X invokes an outbound DB adapter to write data to a database table. You have
configured JCA at the binding component as follows:
<property name = "jca.retry.count" type = "xs:int" many = "false" override = "may" > 2</property>
<property name = "jca.retry.interval" type = "xs:int" many = "false" override = "may" > 2</property>
You have also modeled a modeled a fault policy to retry the invocation three times in case of
remoteFault as follows:
<retryCount>3<retryCount>
<retryInterval>3<retryInterval>
Which result describes what happens when the database that is being accessed by the above
binding component goes down?
A. The invocation is retrieved for a total of two times every two seconds. Fault policy retries are
ignored.
B. The invocation is retried for a total of six times every three seconds.
C. The invocation is retried for a total of six times every two seconds.
D. The fault policy retries occur within the JCA retries. So two JCA retries are executed two seconds
apart. Within each JCA retry, three fault policy retries are executed three seconds apart.
E. The JCA retries occur within the fault policy retries. So three fault policy retries are executed
three seconds apart. Within each fault policy retry, two JCA retries are executed two seconds apart.
Answer: E

Oracle練習問題   1Z0-478過去問   1Z0-478
Explanation:
Note: *Global retries for any error handling are returned to the BPEL Receive activity instance, for
example, or, more generally, to the point at which the transaction started. Such a retry could occur
if there was an error such as a temporary database fault. The default retry count is by default
indefinite, or specified in the jca.retry.count property.
*Properties you can specify in the composite.xml file include:
/jca.retry.count
Specifies the maximum number of retries before rejection. Again, specifying this value is a pre-
requisite to specifying the other property values.
/jca.retry.interval
Specifies the time interval between retries (measured in seconds.)
*A remoteFault is also thrown inside an activity. It is thrown because the invocation fails. For
example, a SOAP fault is returned by the remote service.

NO.6 Which two features are provided by decision tables?
A. Sets of input data can be bucketed and reviewed for gaps.
B. Data sets can be reviewed for conflicts.
C. Data can be used for only one rule evaluation.
D. A rule evaluation can be used only to enter new output data.
Answer: A,B

Oracle   1Z0-478   1Z0-478認定試験   1Z0-478   1Z0-478
Explanation:
After you create a Decision Table there are operations that you may want to perform on the
Decision Table, including the following:
(A)Find and fix gaps in a Decision Table (B)Finding and resolving conflicts between rules in a
Decision Table Compact or split cells in a Decision Table Merge a condition or split a condition in a
Decision Table
A: *Compact the Decision Table
In this step you compact the rules to merge from eighteen rules to nine rules. This automatically
eliminates the rules that are not needed and preserves the no gap, no conflict properties for the
Decision Table.
*The Conditions area in a Decision Table includes one or more condition rows. Each condition row
has a condition expression and, for each rule, a condition cell. A condition expression is an
expression that you build in Rules Designer. The condition expression is often a fact property or a
function result, but it can be any expression that has a type that can be associated with a bucketset.
B:A Decision Table displays multiple related rules in a single spreadsheet-style view. In Rules
Designer a Decision Table presents a collection of related business rules with condition rows, rules,
and actions presented in a tabular form that is easy to understand. Business users can compare cells
and their values at a glance and can use Decision Table rule analysis features by clicking icons and
selecting values in Rules Designer to help identify and correct conflicting or missing cases.

NO.7 Identify two correct descriptions of Oracle Web Services Manager (OWSM).
A. It enables you to externalize web services security from the applications youbuild.
B. It manages policies in a distributed policy manager that serves as a single policy enforcement
point.
C. Use security and management events, captured by OWSM agents, are displayed using Oracle
BAM.
D. It supplies predefined security policies that enable declarative security and management
definition.
E. It uses Oracle Event Processing (OEP) to determine when security violations have occurred.
Answer: B,C

Oracle   1Z0-478認定証   1Z0-478   1Z0-478
Explanation:
Note: *Oracle WSM allows companies to (1) centrally define and store declarative policies applied
to the multiple web services making up a SOA infrastructure, (2) locally enforce security and
management policies through configurable agents, and (3) monitor runtime security events such as
failed authentication or authorization.
*Oracle Web Services Manager offers a comprehensive and easy-to-use solution for policy
management and security of service infrastructure. It provides visibility and control of the policies
through a centralized administration interface offered by Oracle Enterprise Manager.

NO.8 In your solution, a web service client needs to invoke a series of three web services in support
of a single transaction. The third web service needs the identity of the original web service client.
Which statement describes how the identity is made available by Oracle Web Services Manager
(OWSM)?
A. The transaction manager accesses an internal table that maintains credentials used to invoke
each individual web service in the chain.
B. Each web service in the chain does its own authentication so the third web service handles its
own identity checking.
C. OWSM sets the user in the Java Authentication and Authorization (JAAS) Subject when the first
web service successfully authenticates, and the Java Subject is used by subsequent web services to
access the identity.
D. OWSM stores a SAML token from the first web service invocation in a database table, and that
table is accessed by subsequent web services in the chain to retrieve identity.
Answer: D

Oracle認定試験   1Z0-478   1Z0-478練習問題   1Z0-478   1Z0-478参考書
Explanation:
Oracle Web Services Manager is a component of the Oracle Enterprise Manager Fusion Middleware
Control, a run-time framework that provides centralized management and governance of Oracle
SOA Suite environments and applications. You create and configureOracle Web Services Manager
policies in Oracle Enterprise Manager, and those policies are persisted in a policy store (a database
is recommended). Oracle Web Services Manager lets you define policies against an LDAP directory
and generate standard security tokens (such as SAML tokens) to propagate identities across multiple
Web services used in a single transaction.

NO.9 Identify two features of Oracle BAM.
A. Enterprise Manager's monitoring capabilities are central to Oracle BAM's ability to monitor
performance indicators.
B. You can analyze and present Information from activities spanning multiple systems and
applications.
C. Rich browser-based dashboards provide visibility into current values of key performance
indicators (KPIs).
D. There is a built-in trouble ticket system to track assignment and completion of corrective actions.
Answer: A,C

Oracle   1Z0-478過去問   1Z0-478認定証   1Z0-478練習問題
Explanation:
Note: *Oracle Business Activity Monitoring (Oracle BAM) gives business executives the ability to
monitor their business services and processes in the enterprise, to correlate KPIs down to the actual
business process themselves, and most important, to change business processes quickly or to take
corrective action if the business environment changes.

専門的に言えば、試験を受けるに関するテクニックを勉強する必要があります。IT-Passports.comというサイトは素晴らしいソースサイトで、Oracleの1Z0-478の試験材料、研究材料、技術材料や詳しい解答に含まれています。問題集が提供したサイトは近年で急速に増加しています。あなたは試験の準備をするときに見当もつかないかもしれません。IT-Passports.comのOracleの1Z0-478試験トレーニング資料は専門家と受験生の皆様に証明された有効なトレーニング資料で、あなたが試験の合格することを助けられます。