IT-Passports.comは多くのIT職員の夢を達成することであるウェブサイトです。IT夢を持っていたら、速くIT-Passports.comに来ましょう。 IT-Passports.comにはすごいトレーニング即ち CompTIAのPD0-001試験トレーニング資料があります。これはIT職員の皆が熱望しているものです。あなたが試験に合格することを助けられますから。
PD0-001認定試験の資格を取得するのは容易ではないことは、すべてのIT職員がよくわかっています。しかし、PD0-001認定試験を受けて資格を得ることは自分の技能を高めてよりよく自分の価値を証明する良い方法ですから、選択しなければならならないです。ところで、受験生の皆さんを簡単にIT認定試験に合格させられる方法がないですか。もちろんありますよ。IT-Passports.comの問題集を利用することは正にその最良の方法です。IT-Passports.comはあなたが必要とするすべてのPD0-001参考資料を持っていますから、きっとあなたのニーズを満たすことができます。IT-Passports.comのウェブサイトに行ってもっとたくさんの情報をブラウズして、あなたがほしい試験PD0-001参考書を見つけてください。
試験番号：PD0-001問題集
試験科目：CompTIA 「CompTIA PDI+ Beta Exam」
問題と解答：全861問
IT-Passports.comが提供した商品の品質が高く、頼られているサイトでございます。購入前にネットで部分な問題集を無料にダウンロードしてあとで弊社の商品を判断してください。IT-Passports.comは君の試験に１００％の合格率を保証いたします。迷ってないください。
CompTIAのPD0-001認定試験は現在のIT領域で本当に人気がある試験です。この試験の認証資格を取るのは昇進したい人々の一番良く、最も効果的な選択です。しかも、この試験を通して、あなたも自分の技能を高めて、仕事に役に立つスキルを多くマスターすることができます。そうすれば、あなたはもっと素敵に自分の仕事をやることができ、あなたの優れた能力を他の人に見せることができます。この方法だけであなたはより多くの機会を得ることができます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/PD0-001.html
NO.1 When arriving at the customers location, two different users describe the problem, and from their
description it seems to be two separate problems. Which of the following is an appropriate step to take?
A.Ignore both of them and decide what the real problem is.
B.Set up a separate call for each problem.
C.Have them duplicate the problem at the device.
D.Ask a third person and see if the problem is the same thing.
Answer: C
CompTIA PD0-001認定証 PD0-001 PD0-001認定資格
NO.2 In which of the following sections of an MFP would a technician find a Xenon Lamp?
A.The paper feed section
B.The fuser section
C.The scanner section
D.The transfer section
Answer: C
CompTIA PD0-001練習問題 PD0-001 PD0-001認定資格
NO.3 The polygon mirror is located in which of the following components?
A.Developer unit
B.Scanner unit
C.Fuser unit
D.Laser unit
Answer: D
CompTIA過去問 PD0-001参考書 PD0-001 PD0-001 PD0-001 PD0-001過去問
NO.4 When onsite repairing a printer the technicians cell phone rings and it is a personal call, how should
the technician handle this?
A.Answer the call and talk to your friend at the customer site.
B.Answer the call and tell the friend you will call them later.
C.Let it go to voicemail, call them back between service calls.
D.Let it ring and call the friend back when the customer leaves.
Answer: C
CompTIA認定資格 PD0-001認定証 PD0-001 PD0-001 PD0-001過去問 PD0-001認定資格
NO.5 Which of the following items can be used as a discharge lamp?
A.Halogen lamp
B.Light Emitting Diodes (LED)
C.Fuser lamp
D.Cleaning roller
Answer: B
CompTIA認定証 PD0-001参考書 PD0-001 PD0-001参考書
NO.6 Which of the following is a reason black toner is used in color printers?
A.It decreases the print speed in color laser printers.
B.It prevents moir patterns when printing color photographs.
C.It reduces the cost per page when printing gray scale documents.
D.It makes the color toner resistant to smudging when wet.
Answer: C
CompTIA参考書 PD0-001 PD0-001認定証 PD0-001問題集 PD0-001 PD0-001認定証
NO.7 Which of the following would be the BEST process for the technician to follow when beginning to
diagnose a unit at a customers site?
A.Check the printers error log, and then inform the primary user what the issue is.
B.Go directly to the printer and investigate any issues that are found.
C.Investigate the printers status, then ask the primary user to write down what they think is wrong.
D.Gather information from the primary user, and then evaluate the printers condition.
Answer: D
CompTIA過去問 PD0-001 PD0-001過去問 PD0-001過去問 PD0-001過去問
NO.8 Which of the following type of lamp is used for heating a fuser?
A.Xenon
B.Halogen
C.Incandescent
D.Light Emitting Diode
Answer: B
CompTIA参考書 PD0-001 PD0-001認証試験
NO.9 During the photoconductor preparation step, residual charge can be removed by which of the
following? (Select TWO).
A.Pressure
B.Oil
C.Light
D.Gravity
E.Electrical Charge
Answer: CE
CompTIA PD0-001練習問題 PD0-001参考書 PD0-001認定試験 PD0-001 PD0-001
NO.10 A technician is troubleshooting a network connectivity issue on a MFD and would like to eliminate the
possibility of another device on the network having the same IP address. The technician should:
A.disconnect the MFD and ping the IP address.
B.disconnect the MFD and ping the subnet mask.
C.disconnect the MFD and ping the loopback address.
D.run the ipconfig command from the command prompt.
Answer: A
CompTIA PD0-001 PD0-001 PD0-001
NO.11 When is it advisable to dump the waste toner from a technicians service vacuum?
A.When it is full.
B.It is not recommended.
C.Before performing preventative maintenance.
D.After each call.
Answer: B
CompTIA PD0-001問題集 PD0-001認定試験 PD0-001 PD0-001
NO.12 Which of the following devices can route electrical signals only when activated by an external control
signal?
A.Solenoid
B.Relay
C.Clutch
D.Capacitor
Answer: B
CompTIA認定資格 PD0-001過去問 PD0-001 PD0-001 PD0-001過去問 PD0-001
NO.13 A customer is concerned about excessive media jamming in their device. Which of the following is the
FIRST thing a technician should check?
A.Media feed rollers
B.Cassette drawers
C.Fusing section
D.Device log data
Answer: D
CompTIA PD0-001 PD0-001 PD0-001
NO.14 Which of the following components is part of the ink dispersion system?
A.Print Heads
B.Cleaning heads
C.Pickup Roller
D.Charge Assembly
Answer: A
CompTIA認証試験 PD0-001 PD0-001 PD0-001 PD0-001問題集 PD0-001過去問
NO.15 Which of the following types of media would MOST likely cause above normal amounts of machine
jamming?
A.Envelopes
B.Colored media
C.Letterhead
D.Pre punched
Answer: A
CompTIA参考書 PD0-001認証試験 PD0-001 PD0-001認証試験 PD0-001
NO.16 An encoder sensor typically detects:
A.paper position.
B.shaft rotation.
C.magnetic flux.
D.laser beam strength.
Answer: B
CompTIA PD0-001 PD0-001 PD0-001
NO.17 Which of the following failed components would be responsible for the fuser unit not heating properly?
A.Halogen lamps
B.Ball bearing
C.Hot roller
D.Pressure roller
Answer: A
CompTIA認定資格 PD0-001認定資格 PD0-001認定証 PD0-001 PD0-001認定試験
NO.18 Which of the following is the FIRST step a technician should take when troubleshooting a device
issue?
A.Gather information from the customer.
B.Isolate the problem on the device.
C.Read the service documentation for possible causes.
D.Check the parts life counters.
Answer: A
CompTIA問題集 PD0-001過去問 PD0-001認定試験 PD0-001認証試験
NO.19 Which of the following functions is associated with the developer unit?
A.Supplies toner to the photoconductor
B.Charges the surface of the photoconductor
C.Writes the latent image on the photoconductor
D.Cleans the photoconductor
Answer: A
CompTIA PD0-001 PD0-001
NO.20 A customer has installed a new computer on their network. They can print to the printer but the option
for duplex printing is not available. All other computers have the option. Which of the following is the
cause of the problem?
A.The new computer is printing to the wrong IP address.
B.The new computer is using the wrong protocol.
C.The driver port is not setup correctly.
D.The option has not been selected on the driver.
Answer: D
CompTIA練習問題 PD0-001 PD0-001 PD0-001認証試験 PD0-001 PD0-001練習問題
NO.21 Which of the following is the purpose of a torque limiter in a roller?
A.To reduce wear and tear on rollers.
B.To provide resistance but still allow some slippage.
C.To limit the amount of movement by media.
D.To make it easier to replace rollers.
Answer: B
CompTIA認証試験 PD0-001 PD0-001認定試験 PD0-001参考書
NO.22 The customer has a dedicated ink jet fax machine that is used to send and receive faxes only from the
corporate office. The user complains of streaks on the received faxes while the internal self-prints are fine.
Which of the following should a technician recommend?
A.Clean the scanner glass on the distant machine.
B.Clean the scanner glass on the local machine.
C.Clean the printer head on the local machine.
D.Call the telephone company to increase the line signal level.
Answer: A
CompTIA PD0-001 PD0-001認証試験 PD0-001参考書
NO.23 Scheduled preventative maintenance visits should be carried out:
A.after two unplanned service calls.
B.according to manufacturers specifications.
C.when the device is becoming unreliable.
D.every sixty days.
Answer: B
CompTIA PD0-001参考書 PD0-001認定資格 PD0-001 PD0-001過去問
NO.24 The proper safety guidelines for handling any device specific consumables can be found in which of
the following documentation?
A.Material Safety Data Sheets
B.Installation Guides
C.Consumer Reports
D.Devices Parts Catalog
Answer: A
CompTIA PD0-001 PD0-001
NO.25 Using the CMYK color model, the color purple is produced by combining cyan and which other color?
A.Green
B.Magenta
C.Yellow
D.Black
Answer: B
CompTIA PD0-001認定資格 PD0-001 PD0-001 PD0-001問題集
NO.26 Which of the following utilities could be used to determine a subnet mask?
A.PING
B.NSLOOKUP
C.TRACERT
D.IPCONFIG
Answer: D
CompTIA PD0-001認証試験 PD0-001 PD0-001
NO.27 A polygon mirror is part of which of the following assemblies?
A.Laser unit
B.Developer unit
C.Charge assembly
D.Fuser assembly
Answer: A
CompTIA PD0-001問題集 PD0-001過去問 PD0-001練習問題 PD0-001練習問題 PD0-001
NO.28 How many CCDs are located in a single pass duplex ADF?
A.One
B.2
C.3
D.4
Answer: B
CompTIA認証試験 PD0-001 PD0-001 PD0-001練習問題
NO.29 Which of the following stages in the laser print process attracts toner to the latent image on the
photoconductor?
A.Writing
B.Fusing
C.Development
D.Transfer
Answer: C
CompTIA PD0-001認定資格 PD0-001
NO.30 How should a service representative provide closure at the end of a call for a client?
A.Explain the issues of the call, the steps taken to resolve them and query the client if they have any
additional needs.
B.Explain the solution to the issue and then provide the client with the technicians contact information in
case they have any questions.
C.Give the client a technical explanation on the issue and how it was fixed; throw any faulty equipment in
the clients garbage.
D.Proceed to the next service call, check back with the client in a week to see if they have any additional
needs.
Answer: A
CompTIA練習問題 PD0-001認定試験 PD0-001認定試験 PD0-001
CompTIA PD0-001認証試験に合格することが簡単ではなくて、CompTIA PD0-001証明書は君にとってはIT業界に入るの一つの手づるになるかもしれません。しかし必ずしも大量の時間とエネルギーで復習しなくて、弊社が丹精にできあがった問題集を使って、試験なんて問題ではありません。
没有评论:
发表评论