多くのIT者がEMCのE20-016 E22-275 E20-591 E20-538認定試験を通してIT業界の中で良い就職機会を得たくて、生活水準も向上させたいです。でも多くの人が合格するために大量の時間とエネルギーをかかって、無駄になります。同等の効果は、IT-Passports.comは君の貴重な時間とお金を節約するだけでなく１００％の合格率を保証いたします。もし弊社の商品が君にとっては何も役割にならなくて全額で返金いたいます。
進歩を勇敢に追及する人生こそ素晴らしい人生です。未来のある日、椅子で休むとき、自分の人生を思い出したときに笑顔が出たら成功な人生になります。あなたは成功な人生がほしいですか。そうしたいのなら、速くIT-Passports.comのEMCのE20-016 E22-275 E20-591 E20-538試験トレーニング資料を利用してください。これはIT認証試験を受ける皆さんのために特別に研究されたもので、１００パーセントの合格率を保証できますから、躊躇わずに購入しましょう。
何でも上昇しているこの時代に、自分の制限を突破したくないのですか。給料を倍増させることも不可能ではないです。EMCのE20-016 E22-275 E20-591 E20-538試験に合格したら、あなたは夢を実現することができます。IT-Passports.comはあなたの最高のトレーニング資料を提供して、１００パーセントの合格率を保証します。これは本当のことです。疑いなくすぐIT-Passports.comのEMCのE20-016 E22-275 E20-591 E20-538試験トレーニング資料を購入しましょう。
従来の試験によってIT-Passports.com が今年のEMCのE20-016 E22-275 E20-591 E20-538認定試験を予測してもっとも真実に近い問題集を研究し続けます。IT-Passports.comは100%でEMCのE20-016 E22-275 E20-591 E20-538認定試験に合格するのを保証いたします。
試験番号：E20-016問題集
試験科目：EMC 「Storage Networking Design Specialist Exam for Data Center Architects」
問題と解答：全114問
試験番号：E22-275問題集
試験科目：EMC 「recoverpoint backup and recovery specialist exam 」
問題と解答：全126問
試験番号：E20-591問題集
試験科目：EMC 「Backup and Recovery Solutions Exam for Technology Architects」
問題と解答：全160問
試験番号：E20-538問題集
試験科目：EMC 「Network Attached Storage (NAS) Specialist Exam for Storage Administrators」
問題と解答：全115問
IT-Passports.com のEMCのE20-016 E22-275 E20-591 E20-538問題集は最も徹底的で、最も正確で、かつアップ·ツー·デートなものです。当面の市場であなたに初めて困難を乗り越える信心を差し上げられるユニークなソフトです。EMCのE20-016 E22-275 E20-591 E20-538認証試験は世界でどの国でも承認されて、すべての国が分け隔てをしないの試験です。IT-Passports.com のEMCのE20-016 E22-275 E20-591 E20-538認証証明書はあなたが自分の知識と技能を高めることに助けになれることだけでなく、さまざまな条件であなたのキャリアを助けることもできます。IT-Passports.com のEMCのE20-016 E22-275 E20-591 E20-538問題集を利用することをお勧めいたします。
IT 職員のそれぞれは昇進または高給のために頑張っています。これも現代社会が圧力に満ちている一つの反映です。そのためにEMCのE20-016 E22-275 E20-591 E20-538認定試験に受かる必要があります。適当なトレーニング資料を選んだらこの試験はそんなに難しくなくなります。IT-Passports.comのEMCのE20-016 E22-275 E20-591 E20-538試験トレーニング資料は最高のトレーニング資料で、あなたの全てのニーズを満たすことができますから、速く行動しましょう。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/E22-275.html
NO.1 Refer to the Exhibit.
You are troubleshooting a RecoverPoint issue where consistency groups, using a kdriver splitter, have
stopped working. While analyzing the problem, you ran detect Fibre Channel targets from the SAN
Diagnostics menu. What does this output tell you that relates to the problem in the environment?
A. RPA is not zoned to any hosts
B. All RPA HBA ports are being used as targets
C. Even and odd ports should not see the same targets
D. Ports 0 and 3 should not be connected to the same fabric
Answer: A
EMC認定試験 E22-275認定試験 E22-275 E22-275 E22-275認定試験
NO.2 You are finalizing a RecoverPoint setup that makes use of the Symmetrix VMAXe splitter. You are about
to create the masking view for the RecoverPoint cluster initiator group.
Which setting must be enabled to allow the RPAs to write to the replica volumes when image access is
disabled?
A. Write Protect Bypass
B. Always Push Old
C. Backlog Mirroring
D. Device Tagging
Answer: A
EMC E22-275 E22-275 E22-275練習問題 E22-275 E22-275
NO.3 A customer wants to add a new RecoverPoint UserID. Which role must their UserID belong to in order to
manage user settings?
A. Security
B. Admin
C. Boxmgmt
D. Monitor
Answer: A
EMC E22-275 E22-275 E22-275
NO.4 Refer to the Exhibit.
You are troubleshooting High Load activities on two consistency groups (CGs). As part of your tasks, you
have run the data collect and are reviewing the system log files for the CGs.
What is a possible root cause for this High Load period?
A. The preferred RPA has lost communications with the remote RPA and caused a failover of the CG
within the cluster.
B. The local site has lost connectivity to the remote site and caused the CG to go into Marking mode.
C. There is no journal assigned to the CG in the local site, causing latency build up during data transfer.
D. The copies are cross-connected between the sites causing additional I/O to flood the connectivity
between the sites.
Answer: A
EMC E22-275 E22-275練習問題
NO.5 You are installing the RecoverPoint splitter agent on a B-Series switch. After downloading the agent
binary file to the blade processor, which step must be completed prior to successfully running the
command?
A. chmod +x agent_binary_file
B. chmod +rw agent_binary_file
C. /thirdparty/recoverpoint/install/zoning_script.sh
D. /thirdparty/recoverpoint/install/kdrv start
Answer: A
EMC過去問 E22-275練習問題 E22-275 E22-275認定資格
NO.6 You have just enabled the zones and re-enabled the configuration on a AP-7600B switch. Where would
you run the thirdparty/recoverpoint/install/kdrv status command to verify the status of the kdriver on the
switch?
A. As root in the blade processor
B. As admin in the blade processor
C. As root in the control processor
D. As admin in the control processor
Answer: A
EMC E22-275認定資格 E22-275認定資格 E22-275
NO.7 You have installed the Solaris kdriver on a host. When validating the installation, you find that the
splitter is not seen by the RecoverPoint Management Application. Other splitters appear correctly in the
GUI.
Which step should you take on the host to discover the splitter by the GUI?
A. Run the /etc/init.d/kdrv start command
B. Run the rc.kdrv configure command and restart the kdriver
C. Run the rc.kdrv start command and reboot the host
D. Run the devfsadm command
Answer: A
EMC認証試験 E22-275 E22-275参考書 E22-275 E22-275過去問
NO.8 Which generation of RecoverPoint Appliance hardware must be used to ensure you can use a CRR
over FC configuration?
A. Gen2 and 3 only
B. Gen2 and 4 only
C. Gen2, 3, and 4
D. Gen3 and 4 only
Answer: D
EMC E22-275参考書 E22-275過去問
NO.9 When installing a Microsoft Windows kdriver splitter, you receive the dialog box shown in the exhibit
and the installation stops.
What must you do to recover the installation?
A. Click Next, correct the SAN issue, and run SAN Diagnostics again
B. Click Next and Accept the SAN issue warning to continue the installation
C. Click Next to resume the installation with flags
D. Click Back to reconfigure the kdriver parameters
Answer: A
EMC E22-275練習問題 E22-275 E22-275認定資格 E22-275
NO.10 You have finished deploying SANTap in a RecoverPoint CRR environment. At Site 2 everything looks
fine. However, at Site 1 you see the following message on the RecoverPoint Management Application:
WARNING: RPA cannot access discovery AVT: 7001248288220000 ; Site1 ; RPA1 in Site1 ; Cisco -
CVT22-2109000dec3c3182
You have checked that back-end and front-end VSANs are properly configured with the correct members
in each. Which action can you take to perform a full discovery of ITLs and recreation of AVTs to fix this
issue?
A. SSH as 'admin' and run the refresh_santap_view command
B. Refresh the splitters on the RecoverPoint Management Application
C. Rescan the SAN on the RecoverPoint Management Application
D. SSH as 'admin' and run the get_santap_view command
Answer: A
EMC認定証 E22-275 E22-275 E22-275
NO.11 A customer has a RecoverPoint environment defined with two RPAs at each site. They created two
consistency groups (CGs), each one in a different RPA. Their business requires that both consistency
groups act as a single unit as they are dependent on one another.
How can they achieve this requirement?
A. Create one Group Set for both CGs
B. Enable the RecoverPoint Snapshot Consolidation feature
C. Select the same primary RPA for both CGs
D. Configure distributed consistency groups
Answer: A
EMC E22-275練習問題 E22-275 E22-275問題集
NO.12 In a Brocade splitter implementation using frame redirect mode, how many DPCs are available?
A. 1
B. 2
C. 3
D. 4
Answer: B
EMC E22-275過去問 E22-275認定資格
NO.13 You are selecting the RecoverPoint repository volume using Deployment Manager at a customer's site.
If the customer's environment makes use of an EMC VNX array, what needs to be considered?
A. Selected LUN will be formatted
B. Use of a thin provisioned LUN is supported
C. LUN is accessible by only one RPA
D. Thin LUNs have to be pre-allocated
Answer: A
EMC E22-275 E22-275過去問 E22-275
NO.14 You want to upgrade a RecoverPoint environment using Deployment Manager (DM). As a prerequisite
to continuing with the upgrade, which TCP port needs to be open between the management station where
the DM is installed and the RPA management IP addresses?
A. 22
B. 23
C. 80
D. 161
Answer: A
EMC認定試験 E22-275練習問題 E22-275問題集 E22-275認定資格
NO.15 A customer is planning to deploy a 2-node RecoverPoint cluster at each data center. They will make use
of dual stack for its LAN network connection.
How many IP addresses should the customer plan for per site, including management IP addresses.?
A. 5
B. 6
C. 7
D. 8
Answer: D
EMC過去問 E22-275 E22-275
NO.16 You have a customer with an EMC VNX array at each site that uses both block and file storage. They
would like to use the VNX splitter to replicate all their iSCSI data LUNs.
How would you configure RecoverPoint?
A. Use the Consistency Group Wizard to create a CG
B. Use Installation Manager and "Expose" all iSCSI LUNs
C. Check the "Enable iSCSI Replication" option in the CG profile
D. Replication of iSCSI LUNs are not supported at this time
Answer: A
EMC認定試験 E22-275参考書 E22-275認定証
NO.17 You are implementing a RecoverPoint CRR solution. The RPAs that were delivered do not have the
correct version of RecoverPoint.
What is the EMC-preferred way to load the correct software version to the RPAs?
A. Before launching Deployment Manager
B. During the Deployment Manager installation process
C. After completing the installation but before the license is installed
D. After the installation is complete
Answer: A
EMC認定資格 E22-275認定試験 E22-275
NO.18 What is the blade processor in a Brocade splitter?
A. A separate command shell which loads and operates the splitter
B. A special slot in a Brocade director with intelligent switch capabilities
C. A daughterboard in the switch to allow RecoverPoint integration
D. A dedicated memory space in the RPA to integrate with a Brocade switch
Answer: A
EMC E22-275 E22-275 E22-275
NO.19 Which device allows the installation of a Brocade splitter into a DCX director?
A. PB-48k-18i
B. PB-48k-AP
C. PB-DCX-32P-E
D. PB-DCX-48P-8G
Answer: B
EMC認定証 E22-275過去問 E22-275過去問 E22-275練習問題 E22-275過去問
NO.20 In a cascaded RecoverPoint configuration, a customer experiences a site failure at the secondary site.
What impact does this have on replication?
A.Site 1 to Site 2 replication fails Site 2 to Site 3 replication fails
B.Site 1 to Site 2 replication fails Site 2 to Site 3 replication continues
C.Site 1 to Site 2 replication fails Site 1 to Site 3 replication continues
D.Site 2 to Site 3 replication fails Site 1 to Site 3 replication continues
Answer: A
EMC E22-275認定証 E22-275認証試験 E22-275
没有评论:
发表评论