EMC E20-016 E22-275 E20-591 E20-538認定試験に一発合格したいのか

多くのIT者がEMCのE20-016 E22-275 E20-591 E20-538認定試験を通してIT業界の中で良い就職機会を得たくて、生活水準も向上させたいです。でも多くの人が合格するために大量の時間とエネルギーをかかって、無駄になります。同等の効果は、IT-Passports.comは君の貴重な時間とお金を節約するだけでなく１００％の合格率を保証いたします。もし弊社の商品が君にとっては何も役割にならなくて全額で返金いたいます。

進歩を勇敢に追及する人生こそ素晴らしい人生です。未来のある日、椅子で休むとき、自分の人生を思い出したときに笑顔が出たら成功な人生になります。あなたは成功な人生がほしいですか。そうしたいのなら、速くIT-Passports.comのEMCのE20-016 E22-275 E20-591 E20-538試験トレーニング資料を利用してください。これはIT認証試験を受ける皆さんのために特別に研究されたもので、１００パーセントの合格率を保証できますから、躊躇わずに購入しましょう。

何でも上昇しているこの時代に、自分の制限を突破したくないのですか。給料を倍増させることも不可能ではないです。EMCのE20-016 E22-275 E20-591 E20-538試験に合格したら、あなたは夢を実現することができます。IT-Passports.comはあなたの最高のトレーニング資料を提供して、１００パーセントの合格率を保証します。これは本当のことです。疑いなくすぐIT-Passports.comのEMCのE20-016 E22-275 E20-591 E20-538試験トレーニング資料を購入しましょう。

従来の試験によってIT-Passports.com が今年のEMCのE20-016 E22-275 E20-591 E20-538認定試験を予測してもっとも真実に近い問題集を研究し続けます。IT-Passports.comは100%でEMCのE20-016 E22-275 E20-591 E20-538認定試験に合格するのを保証いたします。

試験番号：E20-016問題集
試験科目：EMC 「Storage Networking Design Specialist Exam for Data Center Architects」
問題と解答：全114問

試験番号：E22-275問題集
試験科目：EMC 「recoverpoint backup and recovery specialist exam 」
問題と解答：全126問

試験番号：E20-591問題集
試験科目：EMC 「Backup and Recovery Solutions Exam for Technology Architects」
問題と解答：全160問

試験番号：E20-538問題集
試験科目：EMC 「Network Attached Storage (NAS) Specialist Exam for Storage Administrators」
問題と解答：全115問

IT-Passports.com のEMCのE20-016 E22-275 E20-591 E20-538問題集は最も徹底的で、最も正確で、かつアップ·ツー·デートなものです。当面の市場であなたに初めて困難を乗り越える信心を差し上げられるユニークなソフトです。EMCのE20-016 E22-275 E20-591 E20-538認証試験は世界でどの国でも承認されて、すべての国が分け隔てをしないの試験です。IT-Passports.com のEMCのE20-016 E22-275 E20-591 E20-538認証証明書はあなたが自分の知識と技能を高めることに助けになれることだけでなく、さまざまな条件であなたのキャリアを助けることもできます。IT-Passports.com のEMCのE20-016 E22-275 E20-591 E20-538問題集を利用することをお勧めいたします。

IT 職員のそれぞれは昇進または高給のために頑張っています。これも現代社会が圧力に満ちている一つの反映です。そのためにEMCのE20-016 E22-275 E20-591 E20-538認定試験に受かる必要があります。適当なトレーニング資料を選んだらこの試験はそんなに難しくなくなります。IT-Passports.comのEMCのE20-016 E22-275 E20-591 E20-538試験トレーニング資料は最高のトレーニング資料で、あなたの全てのニーズを満たすことができますから、速く行動しましょう。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/E22-275.html

NO.1 Refer to the Exhibit.
You are troubleshooting a RecoverPoint issue where consistency groups, using a kdriver splitter, have
stopped working. While analyzing the problem, you ran detect Fibre Channel targets from the SAN
Diagnostics menu. What does this output tell you that relates to the problem in the environment?
A. RPA is not zoned to any hosts
B. All RPA HBA ports are being used as targets
C. Even and odd ports should not see the same targets
D. Ports 0 and 3 should not be connected to the same fabric
Answer: A

EMC認定試験   E22-275認定試験   E22-275   E22-275   E22-275認定試験

NO.2 You are finalizing a RecoverPoint setup that makes use of the Symmetrix VMAXe splitter. You are about
to create the masking view for the RecoverPoint cluster initiator group.
Which setting must be enabled to allow the RPAs to write to the replica volumes when image access is
disabled?
A. Write Protect Bypass
B. Always Push Old
C. Backlog Mirroring
D. Device Tagging
Answer: A

EMC   E22-275   E22-275   E22-275練習問題   E22-275   E22-275

NO.3 A customer wants to add a new RecoverPoint UserID. Which role must their UserID belong to in order to
manage user settings?
A. Security
B. Admin
C. Boxmgmt
D. Monitor
Answer: A

EMC   E22-275   E22-275   E22-275

NO.4 Refer to the Exhibit.
You are troubleshooting High Load activities on two consistency groups (CGs). As part of your tasks, you
have run the data collect and are reviewing the system log files for the CGs.
What is a possible root cause for this High Load period?
A. The preferred RPA has lost communications with the remote RPA and caused a failover of the CG
within the cluster.
B. The local site has lost connectivity to the remote site and caused the CG to go into Marking mode.
C. There is no journal assigned to the CG in the local site, causing latency build up during data transfer.
D. The copies are cross-connected between the sites causing additional I/O to flood the connectivity
between the sites.
Answer: A

EMC   E22-275   E22-275練習問題

NO.5 You are installing the RecoverPoint splitter agent on a B-Series switch. After downloading the agent
binary file to the blade processor, which step must be completed prior to successfully running the
command?
A. chmod +x agent_binary_file
B. chmod +rw agent_binary_file
C. /thirdparty/recoverpoint/install/zoning_script.sh
D. /thirdparty/recoverpoint/install/kdrv start
Answer: A

EMC過去問   E22-275練習問題   E22-275   E22-275認定資格

NO.6 You have just enabled the zones and re-enabled the configuration on a AP-7600B switch. Where would
you run the thirdparty/recoverpoint/install/kdrv status command to verify the status of the kdriver on the
switch?
A. As root in the blade processor
B. As admin in the blade processor
C. As root in the control processor
D. As admin in the control processor
Answer: A

EMC   E22-275認定資格   E22-275認定資格   E22-275

NO.7 You have installed the Solaris kdriver on a host. When validating the installation, you find that the
splitter is not seen by the RecoverPoint Management Application. Other splitters appear correctly in the
GUI.
Which step should you take on the host to discover the splitter by the GUI?
A. Run the /etc/init.d/kdrv start command
B. Run the rc.kdrv configure command and restart the kdriver
C. Run the rc.kdrv start command and reboot the host
D. Run the devfsadm command
Answer: A

EMC認証試験   E22-275   E22-275参考書   E22-275   E22-275過去問

NO.8 Which generation of RecoverPoint Appliance hardware must be used to ensure you can use a CRR
over FC configuration?
A. Gen2 and 3 only
B. Gen2 and 4 only
C. Gen2, 3, and 4
D. Gen3 and 4 only
Answer: D

EMC   E22-275参考書   E22-275過去問

NO.9 When installing a Microsoft Windows kdriver splitter, you receive the dialog box shown in the exhibit
and the installation stops.
What must you do to recover the installation?
A. Click Next, correct the SAN issue, and run SAN Diagnostics again
B. Click Next and Accept the SAN issue warning to continue the installation
C. Click Next to resume the installation with flags
D. Click Back to reconfigure the kdriver parameters
Answer: A

EMC   E22-275練習問題   E22-275   E22-275認定資格   E22-275

NO.10 You have finished deploying SANTap in a RecoverPoint CRR environment. At Site 2 everything looks
fine. However, at Site 1 you see the following message on the RecoverPoint Management Application:
WARNING: RPA cannot access discovery AVT: 7001248288220000 ; Site1 ; RPA1 in Site1 ; Cisco -
CVT22-2109000dec3c3182
You have checked that back-end and front-end VSANs are properly configured with the correct members
in each. Which action can you take to perform a full discovery of ITLs and recreation of AVTs to fix this
issue?
A. SSH as 'admin' and run the refresh_santap_view command
B. Refresh the splitters on the RecoverPoint Management Application
C. Rescan the SAN on the RecoverPoint Management Application
D. SSH as 'admin' and run the get_santap_view command
Answer: A

EMC認定証   E22-275   E22-275   E22-275

NO.11 A customer has a RecoverPoint environment defined with two RPAs at each site. They created two
consistency groups (CGs), each one in a different RPA. Their business requires that both consistency
groups act as a single unit as they are dependent on one another.
How can they achieve this requirement?
A. Create one Group Set for both CGs
B. Enable the RecoverPoint Snapshot Consolidation feature
C. Select the same primary RPA for both CGs
D. Configure distributed consistency groups
Answer: A

EMC   E22-275練習問題   E22-275   E22-275問題集

NO.12 In a Brocade splitter implementation using frame redirect mode, how many DPCs are available?
A. 1
B. 2
C. 3
D. 4
Answer: B

EMC   E22-275過去問   E22-275認定資格

NO.13 You are selecting the RecoverPoint repository volume using Deployment Manager at a customer's site.
If the customer's environment makes use of an EMC VNX array, what needs to be considered?
A. Selected LUN will be formatted
B. Use of a thin provisioned LUN is supported
C. LUN is accessible by only one RPA
D. Thin LUNs have to be pre-allocated
Answer: A

EMC   E22-275   E22-275過去問   E22-275

NO.14 You want to upgrade a RecoverPoint environment using Deployment Manager (DM). As a prerequisite
to continuing with the upgrade, which TCP port needs to be open between the management station where
the DM is installed and the RPA management IP addresses?
A. 22
B. 23
C. 80
D. 161
Answer: A

EMC認定試験   E22-275練習問題   E22-275問題集   E22-275認定資格

NO.15 A customer is planning to deploy a 2-node RecoverPoint cluster at each data center. They will make use
of dual stack for its LAN network connection.
How many IP addresses should the customer plan for per site, including management IP addresses.?
A. 5
B. 6
C. 7
D. 8
Answer: D

EMC過去問   E22-275   E22-275

NO.16 You have a customer with an EMC VNX array at each site that uses both block and file storage. They
would like to use the VNX splitter to replicate all their iSCSI data LUNs.
How would you configure RecoverPoint?
A. Use the Consistency Group Wizard to create a CG
B. Use Installation Manager and "Expose" all iSCSI LUNs
C. Check the "Enable iSCSI Replication" option in the CG profile
D. Replication of iSCSI LUNs are not supported at this time
Answer: A

EMC認定試験   E22-275参考書   E22-275認定証

NO.17 You are implementing a RecoverPoint CRR solution. The RPAs that were delivered do not have the
correct version of RecoverPoint.
What is the EMC-preferred way to load the correct software version to the RPAs?
A. Before launching Deployment Manager
B. During the Deployment Manager installation process
C. After completing the installation but before the license is installed
D. After the installation is complete
Answer: A

EMC認定資格   E22-275認定試験   E22-275

NO.18 What is the blade processor in a Brocade splitter?
A. A separate command shell which loads and operates the splitter
B. A special slot in a Brocade director with intelligent switch capabilities
C. A daughterboard in the switch to allow RecoverPoint integration
D. A dedicated memory space in the RPA to integrate with a Brocade switch
Answer: A

EMC   E22-275   E22-275   E22-275

NO.19 Which device allows the installation of a Brocade splitter into a DCX director?
A. PB-48k-18i
B. PB-48k-AP
C. PB-DCX-32P-E
D. PB-DCX-48P-8G
Answer: B

EMC認定証   E22-275過去問   E22-275過去問   E22-275練習問題   E22-275過去問

NO.20 In a cascaded RecoverPoint configuration, a customer experiences a site failure at the secondary site.
What impact does this have on replication?
A.Site 1 to Site 2 replication fails Site 2 to Site 3 replication fails
B.Site 1 to Site 2 replication fails Site 2 to Site 3 replication continues
C.Site 1 to Site 2 replication fails Site 1 to Site 3 replication continues
D.Site 2 to Site 3 replication fails Site 1 to Site 3 replication continues
Answer: A

EMC   E22-275認定証   E22-275認証試験   E22-275

最新EMC E20-538試験の練習問題と解答

IT-Passports.comがもっと早くEMCのE20-538認証試験に合格させるサイトで、EMCのE20-538認証試験についての問題集が市場にどんどん湧いてきます。IT-Passports.comを選択したら、成功をとりましょう。

EMCのE20-538は専門知識と情報技術の検査として認証試験で、IT-Passports.comはあなたに一日早くEMCの認証試験に合格させて、多くの人が大量の時間とエネルギーを費やしても無駄になりました。IT-Passports.comにその問題が心配でなく、わずか20時間と少ないお金をを使って楽に試験に合格することができます。IT-Passports.comは君に対して特別の訓練を提供しています。

購入前にIT-Passports.comが提供した無料の問題集をダウンロードできます。自分の練習を通して、試験のまえにうろたえないでしょう。IT-Passports.comを選択して専門性の訓練が君の試験によいだと思います。

試験番号：E20-538問題集
試験科目：EMC 「Network Attached Storage (NAS) Specialist Exam for Storage Administrators」
問題と解答：全115問

IT業種が新しい業種で、経済発展を促進するチェーンですから、極めて重要な存在ということを我々は良く知っています。IT認証はIT業種での競争な手段の一つです。認証に受かったらあなたは各方面でよく向上させます。でも、受かることが難しいですから、トレーニングツールを利用するのを勧めます。トレーニング資料を選びたいのなら、IT-Passports.comのEMCのE20-538試験トレーニング資料は最高の選択です。この資料の成功率が１００パーセントに達して、あなたが試験に合格することを保証します。

IT-Passports.comのEMCのE20-538試験トレーニング資料はあなたに時間とエネルギーを節約させます。あなたが何ヶ月でやる必要があることを我々はやってさしあげましたから。あなたがするべきことは、IT-Passports.comのEMCのE20-538試験トレーニング資料に受かるのです。あなた自身のために、証明書をもらいます。IT-Passports.com はあなたに必要とした知識と経験を提供して、EMCのE20-538試験の目標を作ってあげました。IT-Passports.comを利用したら、試験に合格しないことは絶対ないです。

EMC E20-538認証試験に合格することが簡単ではなくて、EMC E20-538証明書は君にとってはIT業界に入るの一つの手づるになるかもしれません。しかし必ずしも大量の時間とエネルギーで復習しなくて、弊社が丹精にできあがった問題集を使って、試験なんて問題ではありません。

IT-Passports.comを選ぶかどうか状況があれば、弊社の無料なサンプルをダウンロードしてから、決めても大丈夫です。こうして、弊社の商品はどのくらいあなたの力になるのはよく分かっています。IT-Passports.comはEMC E20-538認証試験を助けって通じての最良の選択で、１００％のEMC E20-538認証試験合格率のはIT-Passports.com最高の保証でございます。君が選んだのはIT-Passports.com、成功を選択したのに等しいです。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/E20-538.html

NO.1 A network administrator needs to create a trunk on a Data Mover from dissimilar physical network
devices.
What networking configuration should be used to accomplish this?
A. LACP
B. Fail Safe Network
C. EtherChannel
D. SNMP
Answer: C

EMC練習問題   E20-538認定資格   E20-538認定証   E20-538

NO.2 You are creating an auto-extend file system. What would happen if you leave the Maximum Capacity
option empty?
A. File system would grow to the pool capacity limit.
B. Data would be overwritten.
C. File system would fail to auto-extend.
D. Write I/Os would be saved in cache until more space is added.
Answer: A

EMC   E20-538   E20-538   E20-538   E20-538

NO.3 Which command would successfully extend a Data Mover root file system?
A. as root issue /nas/sbin/rootnas_fs -xtend root_fs_2 size=2G pool=clar_r5_performance
B. as nasadmin issue nas_fs -xtend root_fs_2 size=2G pool=clar_r5_performance
C. as root issue /nas/sbin/rootnas_fs -xtend root_fs_2 size=2K pool=clar_r5_performance
D. as nasadmin issue nas_fs -xtend root_fs_2 size=2G pool=clar_r5_performance
Answer: A

EMC   E20-538問題集   E20-538   E20-538参考書   E20-538認定資格

NO.4 Which conditions must be met before tree quotas can be enabled?
A. File system and parent directories must exist, but the parent directory on which the tree quota is to be
applied must already exist.
B. File system and parent directories must exist, but the parent directory on which the tree quota is to be
applied must not exist.
C. Tree directory structure to be quoted must be populated with data.
D. Tree directory structure to be quoted must be at the root of the file system.
Answer: B

EMC過去問   E20-538   E20-538   E20-538過去問

NO.5 You are running out of capacity on your Celerra, and additional storage is already on order. Meanwhile,
which quota configuration would track user consumption?
A. User quotas on the file system
B. Group quotas on the tree
C. Tree quotas on the file system
D. User quotas on the tree
Answer: A

EMC   E20-538認定資格   E20-538   E20-538

NO.6 When a Celerra quota is turned off, how does that affect the existing user and group quota information?
A. User and group quota statistics are deleted.
B. Group statistics are retained and user statistics are not.
C. User and group statistics are retained.
D. User statistics are retained and group statistics are not.
Answer: C

EMC過去問   E20-538認定試験   E20-538   E20-538   E20-538

NO.7 A site administrator needs to disable user and group quotas. What happens to the existing quota
configuration and metadata?
A. Maintained
B. Enforced
C. Deleted
D. Reset
Answer: A

EMC   E20-538問題集   E20-538認定資格   E20-538

NO.8 An administrator configured Data Mover network devices to transmit frames on all links for redundancy.
Which network configuration was used to accomplish this.?
A. LACP
B. Proxy ARP
C. Ethernet channel
D. RARP
Answer: A

EMC   E20-538認定試験   E20-538参考書   E20-538   E20-538認定資格

NO.9 What is a minimum requirement when creating a file system using Manual Volume Management?
A. Metavolume
B. Mirror volume
C. Sliced volumes
D. Striped volumes
Answer: A

EMC練習問題   E20-538練習問題   E20-538   E20-538認定資格   E20-538認定資格

NO.10 A system administrator is trying to create a non-root file system of type UxFS, on a metavolume. What is
the minimum size to create the file system?
A. 4 GB
B. 1 MB
C. 2 GB
D. 2 MB
Answer: D

EMC   E20-538   E20-538認定資格   E20-538

NO.11 You are asked by management to create a project directory and track the individual user consumption
in this directory using Celerra quota features. No limits should be enforced.
What would be part of an appropriate procedure to satisfy this requirement?
A. Set up a user quota on the share; specify the limits with the keyword "none" in the CLI
B. Set up a tree quota on the new directory; set up a user quota on the quota tree; specify the limits for the
tree quota and user quota with a value of zero in the GUI
C. Set up a tree quota on the new directory; leave the two fields specifying the limits for the quota tree and
the user quota blank in the Unisphere GUI
D. Set up a user quota on the file system (accommodating the new directory); specify the limits with the
keyword "none" in the GUI
Answer: C

EMC認証試験   E20-538認定証   E20-538   E20-538

NO.12 You enter the following command: nas_fs -create size=3M pool=clar_r5_economy
What will be the result?
A. The file system is created with a default file system name.
B. The file system and a mountpoint are created.
C. Only the mountpoint is created.
D. The file system is not created.
Answer: A

EMC   E20-538問題集   E20-538

NO.13 Which statement describes the public network connection of a Celerra with a single Control Station?
A. Comprised of a single physical Ethernet connection
B. Is formed from dual redundant physical Ethernet connections
C. Comprised of a virtual Ethernet EtherChannel connection
D. Is formed from a virtual Ethernet LACP connection
Answer: A

EMC   E20-538   E20-538認定証   E20-538問題集   E20-538

NO.14 Management asks you to set quota limits on a directory tree.
They want the default set to 500 MB with a possible overhead of 20%. They want to enforce these limits
on the sum of the logical size of objects in that quota tree. What is part of the correct answer?
A. Set the hard limit to 600 MB, and set the file size quota policy on the Data Mover.
B. Set the hard limit to 600 MB, and set the file size quota policy on the file system.
C. Set the hard limit to 500 MB, and set the file size quota policy on the file system.
D. Set the hard limit to 500 MB, and set the blocksize quota policy.
Answer: A

EMC認定試験   E20-538   E20-538問題集   E20-538練習問題   E20-538

NO.15 A site administrator would like to have file system quota implemented. However, the administrator is
worried about users who create symbolic links.
How can symbolic links be excluded from the file system quota?
A. Use group and user quotas together
B. Use the filesize policy
C. Use the block policy
D. Use the excl option when configuring the quota
Answer: B

EMC認証試験   E20-538認定試験   E20-538   E20-538練習問題

IT 職員のそれぞれは昇進または高給のために頑張っています。これも現代社会が圧力に満ちている一つの反映です。そのためにEMCのE20-538認定試験に受かる必要があります。適当なトレーニング資料を選んだらこの試験はそんなに難しくなくなります。IT-Passports.comのEMCのE20-538試験トレーニング資料は最高のトレーニング資料で、あなたの全てのニーズを満たすことができますから、速く行動しましょう。