Microsoftの070-463認証試験のために少ないお金でよい成果を取られるのIT-Passports.comのは最良の選択でございます。IT-Passports.comは例年試験内容を提供したあなたに後悔しないように価値があるサイトだけではなく、無料の一年更新サービスも提供するに最も賢明な選択でございます。
成功することが大変難しいと思っていますか。IT認定試験に合格するのは難しいと思いますか。今Microsoftの070-463認定試験のためにため息をつくのでしょうか。実際にはそれは全く不要です。IT認定試験はあなたの思い通りに神秘的なものではありません。我々は適当なツールを使用して成功することができます。適切なツールを選択する限り、成功することは正に朝飯前のことです。どんなツールが最高なのかを知りたいですか。いま教えてあげます。IT-Passports.comの070-463問題集が最高のツールです。この問題集には試験の優秀な過去問が集められ、しかも最新のシラバスに従って出題される可能性がある新しい問題も追加しました。これはあなたが一回で試験に合格することを保証できる問題集です。
多くの時間と労力をかかってMicrosoftの070-463認定試験に合格するを冒険にすると代わりIT-Passports.comが提供した問題集を利用してわずか一度お金かかって合格するのは価値があるでしょう。今の社会の中で時間がそんなに重要で最も保障できるIT-Passports.comを選ばましょう。
試験番号：070-463問題集
試験科目：Microsoft 「Implementing a Data Warehouse with Microsoft SQL Server 2012」
問題と解答：全123問
あなたはその他のMicrosoft 070-463認証試験に関するツールサイトでも見るかも知れませんが、弊社はIT業界の中で重要な地位があって、IT-Passports.comの問題集は君に100%で合格させることと君のキャリアに変らせることだけでなく一年間中で無料でサービスを提供することもできます。
多くの人々は高い難度のIT認証試験に合格するのは専門の知識が必要だと思います。それは確かにそうですが、その知識を身につけることは難しくないとといわれています。IT業界ではさらに強くなるために強い専門知識が必要です。Microsoft 070-463認証試験に合格することが簡単ではなくて、Microsoft 070-463証明書は君にとってはIT業界に入るの一つの手づるになるかもしれません。しかし必ずしも大量の時間とエネルギーで復習しなくて、弊社が丹精にできあがった問題集を使って、試験なんて問題ではありません。
「あきらめたら そこで試合終了ですよ」という『スラムダンク』の中の安西監督が言った名言があります。この文は人々に知られています。試合と同じ、試験もそのどおりですよ。試験に準備する時間が十分ではないから、070-463認定試験を諦めた人がたくさんいます。しかし、優秀な資料を利用すれば、短時間の準備をしても、高得点で試験に合格することができます。信じないでしょうか。IT-Passports.comの試験問題集はそのような資料ですよ。はやく試してください。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/070-463.html
NO.1 You are designing a data warehouse for a software distribution business that stores sales by software
title.It stores sales targets by software category.Software titles are classified into subcategories and
categories.Each software title is included in only a single software subcategory, and each subcategory is
included in only a single category.The data warehouse will be a data source for an Analysis Services
cube.
The data warehouse contains two fact tables:
factSales, used to record daily sales by software title
factTarget, used to record the monthly sales targets by software category
Reports must be developed against the warehouse that reports sales by software title, category and
subcategory, and sales targets.
You need to design the software title dimension.The solution should use as few tables as possible while
supporting all the requirements.
What should you do?
A.Create three software tables, dimSoftware, dimSoftwareCategory.and dimSoftwareSubcategory and a
fourth bridge table that joins software titles to their appropriate category and subcategory table records
with foreign key constraints.Direct the cube developer to use key granularity attributes.
B.Create three software tables, dimSoftware, dimSoftwareCategory, and
dimSoftwareSubcategory.Connect factSales to all three tables and connect factTarget to
dimSoftwareCategory with foreign key constraints.Direct the cube developer to use key granularity
attributes.
C.Create one table, dimSoftware, which contains Software Detail, Category, and Subcategory
columns.Connect factSales to dimSoftware with a foreign key constraint.Direct the cube developer to use
a non-key granularity attribute for factTarget.
D.Create two tables, dimSoftware and dimSoftwareCategory.Connect factSales to dimSoftware and
factTarget to dimSoftwareCategory with foreign key constraints.Direct the cube developer to use key
granularity attributes.
Answer: C
Microsoft認証試験 070-463認定資格 070-463認定試験
NO.2 DRAG DROP
A new SQL Server Integration Services (SSIS) project is deployed to the SSIS catalog.
To troubleshoot some data issues, you must output the data streaming through several data flows into text
files for further analysis.You have the list of data flow package paths and identification strings of the
various task components that must be analyzed.
You need to create these output files with the least amount of administrative and development effort.
Which three stored procedures should you execute in sequence? (To answer, move the appropriate
actions from the list of actions to the answer area and arrange them in the correct order.)
Answer:
NO.3 You are implementing the indexing strategy for a fact table in a data warehouse.The fact table is
named Quotes.The table has no indexes and consists of seven columns:
[ID]
[QuoteDate]
[Open]
[Close]
[High]
[Low]
[Volume]
Each of the following queries must be able to use a columnstore index:
SELECT AVG ([Close]) AS [AverageClose] FROM Quotes WHERE [QuoteDate] BETWEEN '20100101'
AND '20101231'.
SELECT AVG([High] - [Low]) AS [AverageRange] FROM Quotes WHERE [QuoteDate] BETWEEN
'20100101' AND
'20101231'.
SELECT SUM([Volume]) AS [SumVolume] FROM Quotes WHERE [QuoteDate] BETWEEN '20100101'
AND '20101231'.
You need to ensure that the indexing strategy meets the requirements.The strategy must also minimize
the number and size of the indexes.
What should you do?
A.Create one columnstore index that contains [ID], [Close], [High], [Low], [Volume], and [QuoteDate].
B.Create three coiumnstore indexes:
One containing [QuoteDate] and [Close]
One containing [QuoteDate], [High], and [Low]
One containing [QuoteDate] and [Volume]
C.Create one columnstore index that contains [QuoteDate], [Close], [High], [Low], and [Volume].
D.Create two columnstore indexes:
One containing [ID], [QuoteDate], [Volume], and [Close]
One containing [ID], [QuoteDate], [High], and [Low]
Answer: C
Microsoft練習問題 070-463練習問題 070-463問題集 070-463認証試験 070-463過去問 070-463認証試験
NO.4 DRAG DROP
A SQL Server Integration Services (SSIS) project has been deployed to the SSIS catalog.The project
includes a project Connection Manager to connect to the data warehouse.The SSIS catalog includes two
Environments:
Development
QA
Each Environment defines a single Environment Variable named ConnectionString of type string.The
value of each variable consists of the connection string to the development or QA data warehouses.
You need to be able to execute deployed packages by using either of the defined Environments.
Which three actions should you perform in sequence? (To answer, move the appropriate actions from the
list of actions to the answer area and arrange them in the correct order.)
Answer:
NO.5 You are developing a project that contains multiple SQL Server Integration Services (SSIS)
packages.The packages will be deployed to the SSIS catalog.One of the steps in each package accesses
an FTP site to download sales transaction data.
You create project parameters to store the username and password that are used to access the FTP site.
You need to ensure that the username and password values are encrypted when they are deployed.
What should you do?
A.set the Sensitive property of the parameters to True.
B.Set the ProtectionLevel property of the package to EncryptSensitiveWithUserKey.
C.Change the parameters to package parameters.
D.Change the project to the Legacy Deployment model.
Answer: A
Microsoft 070-463 070-463 070-463
NO.6 You develop and deploy a SQL Server Integration Services (SSIS) package.
The package is stored in the file system.
You need to execute the package without importing it to the SSIS server.
What should you use to execute the package? (Each correct answer presents a complete
solution.Choose all that apply.)
A.catalog.start_package
B.dtexec
C.SQL Server Management Studio
D.SQL Server Agent
Answer: CA
Microsoft認証試験 070-463 070-463
NO.7 You are developing a SQL Server Integration Services (SSIS) project that copies a large amount of
rows from a SQL Azure database.The project uses the Package Deployment Model.This project is
deployed to SQL Server on a test server.
You need to ensure that the project is deployed to the SSIS catalog on the production server.
What should you do?
A.Open a command prompt and run the dtexec /dumperror /conn command.
B.Create a reusable custom logging component and use it in the SSIS project.
C.Open a command prompt and run the gacutil command.
D.Add an OnError event handler to the SSIS project.
E.Open a command prompt and execute the package by using the SQL Log provider and running the
dtexecui.exe utility.
F.Open a command prompt and run the dtexec /rep /conn command.
G.Open a command prompt and run the dtutil /copy command.
H.Use an msi file to deploy the package on the server.
I.Configure the SSIS solution to use the Project Deployment Model.
J.Configure the output of a component in the package data flow to use a data tap.
K.Run the dtutil command to deploy the package to the SSIS catalog and store the configuration in SQL
Server.
Answer: I
Microsoft 070-463認定証 070-463過去問 070-463過去問
NO.8 You are designing a data warehouse hosted on SQL Azure.The data warehouse currently includes the
dimUser and dimDistrict dimension tables and the factSales fact table.The dimUser table contains records
for each user permitted to run reports against the warehouse; and the dimDistrict table contains
information about sales districts.
The system is accessed by users from certain districts, as well as by area supervisors and users from the
corporate headquarters.
You need to design a table structure to ensure that certain users can see sales data for only certain
districts.Some users must be permitted to see sales data from multiple districts.
What should you do?
A.Add a district column to the dimUser table.
B.Partition the factSales table on the district column.
C.Create a userDistrict table that contains primary key columns from the dimUser and dimDistrict tables.
D.For each district, create a view of the factSales table that includes a WHERE clause for the district.
Answer: C
Microsoft 070-463認定試験 070-463問題集 070-463認定証
NO.9 You are designing a data warehouse with two fact tables.The first table contains sales per month and
the second table contains orders per day.
Referential integrity must be enforced declaratively.
You need to design a solution that can join a single time dimension to both fact tables.
What should you do?
A.Create a time mapping table.
B.Change the level of granularity in both fact tables to be the same.
C.Merge the fact tables.
D.Create a view on the sales table.
Answer: C
Microsoft認証試験 070-463 070-463練習問題 070-463 070-463
NO.10 DRAG DROP
You are editing a SQL Server Integration Services (SSIS) package that contains a task with a sensitive
property.
You need to create a project parameter and configure it so that its value is encrypted when it is deployed
to the SSIS catalog.
Which three steps should you perform in sequence? (To answer, move the appropriate actions from the
list of actions to the answer area and arrange them in the correct order.)
Answer:
NO.11 You are designing an enterprise star schema that will consolidate data from three independent data
marts.One of the data marts is hosted on SQL Azure.
Most of the dimensions have the same structure and content.However, the geography dimension is
slightly different in each data mart.
You need to design a consolidated dimensional structure that will be easy to maintain while ensuring that
all dimensional data from the three original solutions is represented.
What should you do?
A.Create a junk dimension for the geography dimension.
B.Implement change data capture.
C.Create a conformed dimension for the geography dimension.
D.Create three geography dimensions.
Answer: C
Microsoft練習問題 070-463 070-463過去問 070-463認定資格
NO.12 You maintain a SQL Server Integration Services (SSIS) package.The package was developed by using
SQL Server 2008 Business Intelligence Development Studio (BIDS).
The package includes custom scripts that must be upgraded.
You need to upgrade the package to SQL Server 2012.
Which tool should you use?
A.SSIS Upgrade Wizard in SQL Server 2008 BIDS
B.SSIS Upgrade Wizard in SQL Server Data Tools
C.SQL Server DTExecUI utility (dtexecui.exe)
D.SQL Server dtexec utility (dtexec.exe)
Answer: B
Microsoft 070-463 070-463
NO.13 To facilitate the troubleshooting of SQL Server Integration Services (SSIS) packages, a logging
methodology is put in place.The methodology has the following requirements:
The deployment process must be simplified.
All the logs must be centralized in SQL Server.
Log data must be available via reports or T-SQL.
Log archival must be automated.
You need to configure a logging methodology that meets the requirements while minimizing the amount of
deployment and development effort.
What should you do?
A.Open a command prompt and run the gacutil command.
B.Open a command prompt and execute the package by using the SQL Log provider and running the
dtexecui.exe utility.
C.Add an OnError event handler to the SSIS project.
D.Use an msi file to deploy the package on the server.
E.Configure the output of a component in the package data flow to use a data tap.
F.Run the dtutil command to deploy the package to the SSIS catalog and store the configuration in SQL
Server.
G.Open a command prompt and run the dtexec /rep /conn command.
H.Open a command prompt and run the dtutil /copy command.
I.Open a command prompt and run the dtexec /dumperror /conn command.
J.Configure the SSIS solution to use the Project Deployment Model.
K.Create a reusable custom logging component and use it in the SSIS project.
Answer: J
Microsoft 070-463過去問 070-463認定証 070-463 070-463問題集
NO.14 You are developing a SQL Server Integration Services (SSIS) package.
To process complex scientific data originating from a SQL Azure database, a custom task component is
added to the project.
You need to ensure that the custom component is deployed on a test environment correctly.
What should you do?
A.Add an OnError event handler to the SSIS project.
B.Open a command prompt and run the gacutil command.
C.Configure the SSIS solution to use the Project Deployment Model.
D.Open a command prompt and run the dtexec /dumperror /conn command.
E.Configure the output of a component in the package data flow to use a data tap.
F.Open a command prompt and execute the package by using the SQL Log provider and running the
dtexecui.exe utility.
G.Open a command prompt and run the dtexec /rep /conn command.
H.Run the dtutil command to deploy the package to the SSIS catalog and store the configuration in SQL
Server.
I.Use an msi file to deploy the package on the server.
J.Open a command prompt and run the dtutil /copy command.
K.Create a reusable custom logging component and use it in the SSIS project.
Answer: B
Microsoft練習問題 070-463 070-463 070-463
NO.15 DRAG DROP
A SQL Server Integration Services (SSIS) package named DataFeed interacts with an external vendor
data feed.The package is executed several times a day, either as part of other packages' control flow or
by itself.The external data feed is unreliable because network failures and slow response times are
frequent.The package is currently deployed on the file system.
To analyze the reliability of the external data feed, you must collect execution data.Every time the
DataFeed package is executed, the following information must be logged:
Start Time
End Time
Execution Result
Execution Duration
You need to design a logging solution that meets the requirements by using the least amount of
administrative and development effort.
Which three actions should you perform in sequence? (To answer, move the appropriate actions from the
list of actions to the answer area and arrange them in the correct order.)
Answer:
NO.16 You are reviewing the design of an existing fact table named factSales, which is loaded from a SQL
Azure database by a SQL Server Integration Services (SSIS) package each day.The fact table has
approximately 1 billion rows and is dimensioned by product, sales date, and sales time of day.
The database administrator is concerned about the growth of the database.Users report poor reporting
performance against this database.Reporting requirements have recently changed and the only
remaining report that uses this fact table reports sales by product name, sale month, and sale year.No
other reports will be created against this table.
You need to reduce the report processing time and minimize the growth of the database.
What should you do?
A.Partition the table by product type.
B.Create a view over the fact table to aggregate sales by month.
C.Change the granularity of the fact table to month.
D.Create an indexed view over the fact table to aggregate sales by month.
Answer: C
Microsoft認定資格 070-463 070-463過去問 070-463認定試験 070-463
NO.17 You develop a SQL Server Integration Services (SSIS) package that imports SQL Azure data into a data
warehouse every night.
The SQL Azure data contains many misspellings and variations of abbreviations.To import the data, a
developer used the Fuzzy Lookup transformation to choose the closest-matching string from a reference
table of allowed values.The number of rows in the reference table is very large.
If no acceptable match is found, the Fuzzy Lookup transformation passes a null value.
The current setting for the Fuzzy Lookup similarity threshold is 0.50.
Many values are incorrectly matched.
You need to ensure that more accurate matches are made by the Fuzzy Lookup transformation without
degrading performance.
What should you do?
A.Change the Exhaustive property to True,
B.Change the similarity threshold to 0.55.
C.Change the similarity threshold to 0.40.
D.Increase the maximum number of matches per lookup.
Answer: B
Microsoft認定証 070-463 070-463
NO.18 You install a SQL Server 2012 database engine instance on a production server.A month later, you
install SQL Server 2012 Integration Services (SSIS).
You must develop an SSIS project and deploy it to the server by using the Project Deployment model.
Operations Log records that are outside the configured retention period must be cleaned automatically.
You need to create the SSIS catalog on the production server.
What should you do? (Each correct answer presents part of the solution.Choose all that apply.)
A.Enable XP Command Shell.
B.Enable CLR Integration.
C.Enable OLE Automation.
D.Start the SQL Server Browser service.
E.Enable Cross Database Ownership Chaining.
F.Start the SQL Server Agent service.
G.Enable Ad Hoc Remote Queries.
Answer: FA
Microsoft認定資格 070-463認定証 070-463参考書
NO.19 A SQL Server Integration Services (SSIS) package on a computer is failing periodically in
production.The package was created less than one year ago and was deployed to the SSIS catalog.
Sometimes the package is started on a SQL Agent schedule; sometimes the package is started manually
by an SSIS developer by using the Object Explorer in SQL Server Management Studio.
You need to identify the authenticated user responsible for starting the package each time it failed in the
past.
Where can you find this information?
A.the SQL Server Log
B.the SSISDB.[catalog].[executions] view
C.the SSISDB.[catalog].[event_messages] view
D.the SQL Agent Job History
E.the SQL Agent Error Log
Answer: B
Microsoft 070-463問題集 070-463認証試験
NO.20 You are reviewing the design of a customer dimension table in an existing data warehouse hosted on
SQL Azure.
The current dimension design does not allow the retention of historical changes to customer attributes
such as Postcode.
You need to redesign the dimension to enable the full historical reporting of changes to multiple customer
attributes including Postcode.
What should you do?
A.Add StartDate and EndDate columns to the customer dimension.
B Add an IsCurrent column to the customer dimension.
C.Enable Snapshot Isolation on the data warehouse.
D.Add CurrentValue and PreviousValue columns to the customer dimension.
Answer: A
Microsoft 070-463 070-463 070-463認定試験
近年、IT領域で競争がますます激しくなります。IT認証は同業種の欠くことができないものになりました。あなたはキャリアで良い昇進のチャンスを持ちたいのなら、IT-Passports.comのMicrosoftの070-463試験トレーニング資料を利用してMicrosoftの認証の証明書を取ることは良い方法です。現在、Microsoftの070-463認定試験に受かりたいIT専門人員がたくさんいます。IT-Passports.comの試験トレーニング資料はMicrosoftの070-463認定試験の１００パーセントの合格率を保証します。
