显示标签为“JN0-332”的博文。显示所有博文
显示标签为“JN0-332”的博文。显示所有博文

2014年4月21日星期一

最も優秀なJuniper JN0-332試験問題集のサンプルを試す

JuniperのJN0-332試験の合格書は君の仕事の上で更に一歩の昇進と生活条件の向上を助けられて、大きな財産に相当します。JuniperのJN0-332認定試験はIT専門知識のレベルの考察として、とっても重要な地位になりつつます。IT-Passports.comは最も正確なJuniperのJN0-332試験資料を追求しています。

IT-Passports.comはIT認定試験のJN0-332問題集を提供して皆さんを助けるウエブサイトです。IT-Passports.comは先輩の経験を生かして暦年の試験の材料を編集することを通して、最高のJN0-332問題集を作成しました。問題集に含まれているものは実際試験の問題を全部カバーすることができますから、あなたが一回で成功することを保証できます。

IT-Passports.comのJuniperのJN0-332試験トレーニング資料はPDFぼ形式とソフトウェアの形式で提供して、IT-Passports.comのJuniperのJN0-332試験問題と解答に含まれています。JN0-332認定試験の真実の問題に会うかもしれません。そんな問題はパーフェクトと称するに足って、効果的な方法がありますから、どちらのJuniperのJN0-332試験に成功を取ることができます。IT-Passports.comのJuniperのJN0-332問題集は総合的にすべてのシラバスと複雑な問題をカバーしています。IT-Passports.comのJuniperのJN0-332テストの問題と解答は本物の試験の挑戦で、あなたのいつもの考え方を変換しなければなりません。

試験番号:JN0-332問題集
試験科目:Juniper 「Juniper Networks Certified Internet Specialist, SEC (JNCIS-SEC)」
問題と解答:全406問

Juniper JN0-332認証試験を通るために、いいツールが必要です。Juniper JN0-332認証試験について研究の資料がもっとも大部分になって、IT-Passports.comは早くてJuniper JN0-332認証試験の資料を集めることができます。弊社の専門家は経験が豊富で、研究した問題集がもっとも真題と近づいて現場試験のうろたえることを避けます。

IT-Passports.comは長年にわたってずっとIT認定試験に関連するJN0-332参考書を提供しています。これは受験生の皆さんに検証されたウェブサイトで、一番優秀な試験JN0-332問題集を提供することができます。IT-Passports.comは全面的に受験生の利益を保証します。皆さんからいろいろな好評をもらいました。しかも、IT-Passports.comは当面の市場で皆さんが一番信頼できるサイトです。

IT-Passports.com のJuniperのJN0-332問題集は最も徹底的で、最も正確で、かつアップ·ツー·デートなものです。当面の市場であなたに初めて困難を乗り越える信心を差し上げられるユニークなソフトです。JuniperのJN0-332認証試験は世界でどの国でも承認されて、すべての国が分け隔てをしないの試験です。IT-Passports.com のJuniperのJN0-332認証証明書はあなたが自分の知識と技能を高めることに助けになれることだけでなく、さまざまな条件であなたのキャリアを助けることもできます。IT-Passports.com のJuniperのJN0-332問題集を利用することをお勧めいたします。

JuniperのJN0-332の認定試験の受験生は試験に合格することが難しいというのをよく知っています。しかし、試験に合格することが成功への唯一の道ですから、試験を受けることを選ばなければなりません。職業価値を高めるために、あなたは認定試験に合格する必要があります。IT-Passports.comが開発された試験の問題と解答は異なるターゲットに含まれていますし、カバー率が高いですから、それを超える書籍や資料が絶対ありません。大勢の人たちの利用結果によると、IT-Passports.comの合格率は100パーセントに達したのですから、絶対あなたが試験を受かることに重要な助けになれます。IT-Passports.comは唯一のあなたの向いている試験に合格する方法で、IT-Passports.comを選んだら、美しい未来を選んだということになります。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/JN0-332.html

NO.1 Click the Exhibit button.
Your IKE SAs are up, but the IPsec SAs are not up.Referring to the exhibit, what is the problem?
A. One or more of the phase 2 proposals such as authentication algorithm, encryption algorithm do not
match.
B. The tunnel interface is down.
C. The proxy IDs do not match.
D. The IKE proposals do not match the IPsec proposals.
Answer: C

Juniper認定資格   JN0-332認定証   JN0-332

NO.2 You must configure a SCREEN option that would protect your router from a session table flood.Which
configuration meets this requirement?
A. [edit security screen]
user@host# show
ids-option protectFromFlood
{
icmp
{
ip-sweep threshold 5000;
flood threshold 2000;
}
}
B. [edit security screen]
user@host# show
ids-option protectFromFlood
{
tcp
{
syn-flood
{
attack-threshold 2000;
destination-threshold 2000;
}
}
}
C. [edit security screen]
user@host# show
ids-option protectFromFlood
{
udp
{
flood threshold 5000;
}
}
D. [edit security screen]
user@host# show
ids-option protectFromFlood
{
limit-session
{
source-ip-based 1200;
destination-ip-based 1200;
}
}
Answer: D

Juniper   JN0-332   JN0-332認定資格   JN0-332過去問   JN0-332

NO.3 A user wants to establish an HTTP session to a server behind an SRX device but is being pointed to
Web page on the SRX device for additional authentication.Which type of user authentication is
configured?
A. pass-through with Web redirect
B. WebAuth with HTTP redirect
C. WebAuth
D. pass-through
Answer: A

Juniper   JN0-332   JN0-332問題集

NO.4 You want to allow your device to establish OSPF adjacencies with a neighboring device connected to
interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration
hierarchy must you permit OSPF traffic?
A. [edit security policies from-zone HR to-zone HR]
B. [edit security zones functional-zone management protocols]
C. [edit security zones protocol-zone HR host-inbound-traffic]
D. [edit security zones security-zone HR host-inbound-traffic protocols]
Answer: D

Juniper   JN0-332   JN0-332認定資格   JN0-332   JN0-332   JN0-332認定試験

NO.5 Which statement contains the correct parameters for a route-based IPsec VPN?
A. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
interface ge-0/0/1.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
B. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
interface st0.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
C. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
bind-interface ge-0/0/1.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
D. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
bind-interface st0.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
Answer: D

Juniper認定試験   JN0-332問題集   JN0-332認定試験

NO.6 Which UTM feature requires a license to function?
A. integrated Web filtering
B. local Web filtering
C. redirect Web filtering
D. content filtering
Answer: A

Juniper練習問題   JN0-332   JN0-332   JN0-332認定証   JN0-332認定資格

NO.7 Which zone is system-defined?
A. security
B. functional
C. junos-global
D. management
Answer: C

Juniper問題集   JN0-332   JN0-332過去問   JN0-332練習問題

NO.8 Click the Exhibit button.
You need to alter the security policy shown in the exhibit to send matching traffic to an IPsec VPN tunnel.
Which command causes traffic to be sent through an IPsec VPN named remote-vpn.?
A. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then tunnel remote-vpn
B. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then tunnel ipsec-vpn remote-vpn
C. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then permit ipsec-vpn remote-vpn
D. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then permit tunnel ipsec-vpn remote-vpn
Answer: D

Juniper   JN0-332   JN0-332   JN0-332

NO.9 Which three security concerns can be addressed by a tunnel mode IPsec VPN secured by AH?
(Choose three.)
A. data integrity
B. data confidentiality
C. data authentication
D. outer IP header confidentiality
E. outer IP header authentication
Answer: A,C,E

Juniper   JN0-332過去問   JN0-332練習問題

NO.10 Which two statements are true about hierarchical architecture? (Choose two.)
A. You can assign a logical interface to multiple zones.
B. You cannot assign a logical interface to multiple zones.
C. You can assign a logical interface to multiple routing instances.
D. You cannot assign a logical interface to multiple routing instances.
Answer: B,D

Juniper認定資格   JN0-332   JN0-332参考書   JN0-332問題集

NO.11 Click the Exhibit button.
System services SSH, Telnet, FTP, and HTTP are enabled on the SRX Series device.
Referring to the configuration shown in the exhibit, which two statements are true? (Choose two.)
A. A user can use SSH to interface ge-0/0/0.0 and ge-0/0/1.0.
B. A user can use FTP to interface ge-0/0/0.0 and ge-0/0/1.0.
C. A user can use SSH to interface ge-0/0/0.0.
D. A user can use SSH to interface ge-0/0/1.0.
Answer: B,C

Juniper練習問題   JN0-332練習問題   JN0-332   JN0-332問題集   JN0-332練習問題   JN0-332過去問

NO.12 Which two statements regarding external authentication servers for firewall user authentication are
true? (Choose two.)
A. Up to three external authentication server types can be used simultaneously.
B. Only one external authentication server type can be used simultaneously.
C. If the local password database is not configured in the authentication order, and the configured
authentication server is unreachable, authentication is bypassed.
D. If the local password database is not configured in the authentication order, and the configured
authentication server rejects the authentication request, authentication is rejected.
Answer: B,D

Juniper   JN0-332練習問題   JN0-332練習問題   JN0-332認証試験   JN0-332認定証

NO.13 Which security or functional zone name has special significance to the Junos OS?
A. self
B. trust
C. untrust
D. junos-global
Answer: D

Juniper問題集   JN0-332過去問   JN0-332認定証

NO.14 Which two statements regarding symmetric key encryption are true? (Choose two.)
A. The same key is used for encryption and decryption.
B. It is commonly used to create digital certificate signatures.
C. It uses two keys: one for encryption and a different key for decryption.
D. An attacker can decrypt data if the attacker captures the key used for encryption.
Answer: A,D

Juniper認定証   JN0-332認定証   JN0-332練習問題   JN0-332   JN0-332認証試験

NO.15 Regarding content filtering, what are two pattern lists that can be configured in the Junos OS? (Choose
two.)
A. protocol list
B. MIME
C. block list
D. extension
Answer: B,D

Juniper認定証   JN0-332   JN0-332   JN0-332   JN0-332

NO.16 Which type of Web filtering by default builds a cache of server actions associated with each URL it has
checked?
A. Websense Redirect Web filtering
B. integrated Web filtering
C. local Web filtering
D. enhanced Web filtering
Answer: B

Juniper   JN0-332   JN0-332   JN0-332

NO.17 Which command do you use to display the status of an antivirus database update?
A. show security utm anti-virus status
B. show security anti-virus database status
C. show security utm anti-virus database
D. show security utm anti-virus update
Answer: A

Juniper認定証   JN0-332問題集   JN0-332認証試験

NO.18 Click the Exhibit button.
In the exhibit, a new policy named DenyTelnet was created. You notice that Telnet traffic is still allowed.
Which statement will allow you to rearrange the policies for the DenyTelnet policy to be evaluated before
your Allow policy?
A. insert security policies from-zone A to-zone B policy DenyTelnet before policy Allow
B. set security policies from-zone B to-zone A policy DenyTelnet before policy Allow
C. insert security policies from-zone A to-zone B policy DenyTelnet after policy Allow
D. set security policies from-zone B to-zone A policy Allow after policy DenyTelnet
Answer: A

Juniper   JN0-332認定試験   JN0-332過去問   JN0-332認証試験   JN0-332

NO.19 Which three statements are true regarding IDP? (Choose three.)
A. IDP cannot be used in conjunction with other Junos security features such as SCREEN options, zones,
and security policy.
B. IDP inspects traffic up to the Application Layer.
C. IDP searches the data stream for specific attack patterns.
D. IDP inspects traffic up to the Presentation Layer.
E. IDP can drop packets, close sessions, prevent future sessions, and log attacks for review by network
administrators when an attack is detected.
Answer: B,C,E

Juniper認定試験   JN0-332   JN0-332

NO.20 Which configuration keyword ensures that all in-progress sessions are re-evaluated upon committing a
security policy change?
A. policy-rematch
B. policy-evaluate
C. rematch-policy
D. evaluate-policy
Answer: A

Juniper練習問題   JN0-332   JN0-332認定資格

なんで悩んでいるのですか。JuniperのJN0-332認定試験にどうやって合格するかということを心配していますか。確かに、JN0-332認定試験に合格することは困難なことです。しかし、あまりにも心配する必要はありません。試験に準備するとき、適当な方法を利用する限り、楽に試験に合格することができないわけではないです。では、どんな方法が効果的な方法なのかわかっていますか。IT-Passports.comのJN0-332問題集を使用することが最善の方法の一つです。IT-Passports.comは今まで数え切れないIT認定試験の受験者を助けて、皆さんから高い評判をもらいました。この問題集はあなたの試験の一発合格を保証することができますから、安心に利用してください。

2014年3月26日星期三

Juniper JN0-332 JN0-101 JN0-360 JN0-343 JN0-331認定試験は一層人気があるようになった

JuniperのJN0-332 JN0-101 JN0-360 JN0-343 JN0-331の認定試験の受験生は試験に合格することが難しいというのをよく知っています。しかし、試験に合格することが成功への唯一の道ですから、試験を受けることを選ばなければなりません。職業価値を高めるために、あなたは認定試験に合格する必要があります。IT-Passports.comが開発された試験の問題と解答は異なるターゲットに含まれていますし、カバー率が高いですから、それを超える書籍や資料が絶対ありません。大勢の人たちの利用結果によると、IT-Passports.comの合格率は100パーセントに達したのですから、絶対あなたが試験を受かることに重要な助けになれます。IT-Passports.comは唯一のあなたの向いている試験に合格する方法で、IT-Passports.comを選んだら、美しい未来を選んだということになります。

JN0-332 JN0-101 JN0-360 JN0-343 JN0-331認定試験の準備をするために一生懸命勉強して疲れを感じるときには、他の人が何をしているかを知っていますか。あなたと同じIT認定試験を受験する周りの人を見てください。あなたが試験のために不安と感じているとき、どうして他の人が自信満々で、のんびり見ているのでしょうか。あなたの能力は彼らうより弱いですか。もちろんそんなことはないです。では、なぜ他の人が簡単にJN0-332 JN0-101 JN0-360 JN0-343 JN0-331試験に合格することができるかを知りたいですか。それは彼らがIT-Passports.com のJN0-332 JN0-101 JN0-360 JN0-343 JN0-331問題集を利用したからです。この問題集を勉強することだけで楽に試験に合格することができます。信じないのですか。不思議を思っていますか。では、急いで試してください。まず問題集のdemoを体験することができます。そうすれば、この問題集の品質を確認することができます。はやくIT-Passports.comのサイトをクリックしてください。

適切なトレーニングを選ぶのは成功の保証になれますが、何を選ぶのは非常に重要なことです。IT-Passports.comはとても人気がありますから、それを選ばない理由はないです。もちろん、完璧なトレーニング資料を差し上げましたが、もしあなたに向いていないのなら無用になりますから、IT-Passports.comを利用する前に、一部の問題と解答を無料にダウンロードしてみることができます。そうしたら、完全な試験準備をして、気楽に試験を受かることができるようになります。それも何千何万の受験生がIT-Passports.comを選んだ重要な理由です。IT-Passports.comは一番よい、一番実用的な、一番完全な試験トレーニング資料を提供していますから、受験生たちが試験を準備することに意重要な助けになります。

試験番号:JN0-332問題集
試験科目:Juniper 「Juniper Networks Certified Internet Specialist, SEC (JNCIS-SEC)」
問題と解答:全406問

試験番号:JN0-101問題集
試験科目:Juniper 「JNCIA-JUNOS EXAM OBJECTIVES」
問題と解答:全190問

試験番号:JN0-360問題集
試験科目:Juniper 「Juniper Networks Certified Internet Specialist (JNCIS-SP)」
問題と解答:全252問

試験番号:JN0-343問題集
試験科目:Juniper 「Juniper Networks Certified Internet Specialist (JNCIS-ENT)」
問題と解答:全393問

試験番号:JN0-331問題集
試験科目:Juniper 「SEC,Specialist(JNCIS-SEC)」
問題と解答:全131問

弊社の商品は試験の範囲を広くカバーすることが他のサイトがなかなか及ばならないです。それほかに品質はもっと高くてJuniperのJN0-332 JN0-101 JN0-360 JN0-343 JN0-331認定試験の受験生が最良の選択であり、成功の最高の保障でございます。

Juniper JN0-332 JN0-101 JN0-360 JN0-343 JN0-331認証はIT業界にとても重要な地位があることがみんなが、たやすくその証本をとることはではありません。いまの市場にとてもよい問題集が探すことは難しいです。でも、IT-Passports.comにいつでも最新な問題を探すことができ、完璧な解説を楽に勉強することができます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/JN0-343.html

NO.1 What is the default behavior of a trunk port when it receives transit traffic without a VLAN tag?
A. It drops the traffic.
B. It forwards the traffic.
C. It tags the transit traffic with lowest VLAN ID permitted on the trunk.
D. It tags the transit traffic with highest VLAN ID permitted on the trunk.
Answer: A

Juniper   JN0-343認証試験   JN0-343参考書   JN0-343

NO.2 Which two of the following are functions of the BGP update message? (Choose two.)
A. It withdraws routes that are no longer valid.
B. It notes that an unsupported option is detected from the open message.
C. It transports routing information between BGP peers.
D. It readvertises routes that have already been sent and acknowledged.
Answer: A,C

Juniper   JN0-343認証試験   JN0-343   JN0-343

NO.3 Which protocol is an IGP?
A. LACP
B. STP
C. OSPF
D. PAGP
Answer: B

Juniper   JN0-343認定証   JN0-343過去問   JN0-343過去問

NO.4 Click the Exhibit button.
Based on the exhibit, in which spanning-tree state would the indicated port be.?
A. listening
B. learning
C. forwarding
D. blocking
Answer: C

Juniper   JN0-343   JN0-343   JN0-343認定資格   JN0-343参考書

NO.5 Which of the following can be used for both security and loop prevention?
A. firewall filters
B. DHCP snooping
C. dynamic ARP inspection D. MAC move limiting
Answer: D

Juniper練習問題   JN0-343   JN0-343認定試験

NO.6 Which statement describes the default Junos OS behavior for OSPF?
A. External LSAs are advertised in a stub area.
B. An ABR does not announce a default route into a stub area.
C. Stub area internal routers generate a default route.
D. Only totally stubby areas need a default route.
Answer: B

Juniper認定試験   JN0-343   JN0-343

NO.7 Which BGP attributes are listed in the correct route selection order?
A. local preference, AS path, origin, MED
B. local preference, MED, AS path, origin
C. AS path, local preference, origin, MED
D. MED, origin, local preference, AS path
Answer: A

Juniper問題集   JN0-343   JN0-343練習問題   JN0-343   JN0-343問題集

NO.8 How much overhead does the GRE header add to an IPv4 packet?
A. 24 bytes
B. 32 bytes
C. 48 bytes
D. 64 bytes
Answer: A

Juniper認定試験   JN0-343問題集   JN0-343過去問   JN0-343練習問題

NO.9 What is the correct sequence of OSPF adjacency formation?
A. Down, Init, ExStart, 2way, Loading, Exchange, Full
B. Down, 2way, Init, ExStart, Exchange, Loading, Full
C. Down, Init, 2way, ExStart, Exchange, Loading, Full
D. Down, Init, 2way, Loading, ExStart, Exchange, Full
Answer: C

Juniper過去問   JN0-343認定資格   JN0-343認定試験   JN0-343   JN0-343

NO.10 Which two pieces of information are communicated by IS-IS TLVs? (Choose two.)
A. network protocols supported
B. designated router priority
C. authentication key
D. PDU Length
Answer: A,C

Juniper認定資格   JN0-343   JN0-343問題集   JN0-343認定資格   JN0-343

NO.11 When processing inbound Ethernet frames, which firewall filter is evaluated first by an EX Series
switch?
A. port filter
B. VLAN filter
C. trunk filter
D. route filter
Answer: A

Juniper問題集   JN0-343   JN0-343認定試験

NO.12 Which three statements correctly describe the default BGP advertisement behavior in the Junos OS?
(Choose three.)
A. Routes learned through EBGP are advertised to IBGP peers.
B. Routes learned through EBGP are advertised to other EBGP peers.
C. Routes learned through IBGP are advertised to other IBGP peers.
D. Routes learned through IBGP will be advertised to EBGP peers.
E. Routes learned through an IGP are automatically advertised to EBGP peers.
Answer: A,B,D

Juniper認定試験   JN0-343   JN0-343   JN0-343認定試験   JN0-343認証試験   JN0-343

NO.13 Which routing-instance type allows the sharing of interface routes and the support features used in
source-based routing?
A. virtual-router
B. vrf
C. forwarding
D. multi-instance
Answer: C

Juniper認証試験   JN0-343   JN0-343認定試験   JN0-343

NO.14 Which of the following is enabled by default on an EX Series switch?
A. MAC move limiting
B. storm control
C. IP source guard
D. dynamic ARP inspection
Answer: B

Juniper認定試験   JN0-343   JN0-343認定資格   JN0-343   JN0-343認証試験

NO.15 Which OSPF LSA type is sent by all routers in an area to advertise its connected subnets?
A. router
B. network
C. external
D. summary
Answer: A

Juniper   JN0-343   JN0-343

NO.16 Which OSPF area type can contain Type 7 LSAs?
A. backbone
B. not-so-stubby
C. stub
D. totally stubby
Answer: B

Juniper   JN0-343認証試験   JN0-343認定試験

NO.17 What are two valid BPDU types? (Choose two.)
A. topology change notification
B. configuration change
C. configuration
D. root bridge
Answer: A,C

Juniper認証試験   JN0-343参考書   JN0-343   JN0-343

NO.18 Which Junos command correctly configures the ge-0/0/0.0 interface to operate only for IS-IS Level 2?
A. set interfaces ge-0/0/0.0 family iso level 2 enable
B. set interfaces ge-0/0/0.0 family iso level 1 disable
C. set protocols isis interface ge-0/0/0.0 level 2 enable
D. set protocols isis interface ge-0/0/0.0 level 1 disable
Answer: D

Juniper認証試験   JN0-343   JN0-343   JN0-343   JN0-343過去問

NO.19 Which configuration summarizes external routes in the 172.16.0.0/22 range into a single prefix on an
ABR for Area 1?
A. protocols { ospf { area 0.0.0.1 {
nssa {
default-lsa {
default-metric 1;
metric-type 1;
}
}
area-range 172.16.0.0/22;
}
}
}
B. protocols {
ospf {
area 0.0.0.1 {
nssa {
area-range 172.16.0.0/22;
}
}
}
}
C. protocols {
ospf {
area 0.0.0.1 {
stub summaries;
}
}
}
D. protocols {
ospf {
area 0.0.0.1 {
nssa;
area-range 172.16.0.0/22 restrict;
}
}
}
Answer: B

Juniper参考書   JN0-343参考書   JN0-343認証試験

NO.20 Which configuration correctly sets interface ge-0/0/4 in trunk mode, carrying VLANs v10 and v20?
A. ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members [ v10 v20 ];
}
} } }
B. ge-0/0/4 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
C. ge-0/0/4 {
vlan-tagging;
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
D. ge-0/0/4 {
unit 10 {
family ethernet-switching;
}
unit 20 {
family ethernet-switching;
}
}
Answer: B

Juniper   JN0-343認定試験   JN0-343

NO.21 When loop protection is enabled on an interface, what happens when the port stops receiving BPDUs?
A. The port is placed in a loop-inconsistent role.
B. The port is placed into listening mode.
C. The port is transitioned into a forwarding state.
D. The interface is disabled.
Answer: A

Juniper認定証   JN0-343認定試験   JN0-343認定証

NO.22 Which statements are true about graceful Routing Engines switchover (GRES)?
A. Configuration on both Routing Engines must be synchronized.
B. The backup Routing Engine cannot be managed through IP address because RPD does not run on
backup the Routing Engine.
C. Different hostnames must be configured on both Routing-Engines.
D. Both Routing-Engines are managed through a single out-of-band-management IP address.
Answer: A

Juniper   JN0-343   JN0-343認定証   JN0-343

NO.23 What is the minimum configuration necessary to create two VLANs and two operational RVIs?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B

Juniper参考書   JN0-343参考書   JN0-343   JN0-343認定試験

NO.24 In the following output, what does the asterisk indicate?
A. The interface is configured as a trunk.
B. The interface is configured for spanning-tree protocol.
C. The interface is active.
D. The interface is inactive.
Answer: C

Juniper過去問   JN0-343問題集   JN0-343問題集   JN0-343   JN0-343問題集

NO.25 Given the following output, what has been configured for the 192.168.3.0/24 prefix?
A. per-flow load balancing
B. a floating static route
C. per-packet load balancing
D. a qualified next hop
Answer: A

Juniper   JN0-343参考書   JN0-343認定試験   JN0-343   JN0-343参考書

NO.26 Configuring bpdu-timeout-action enables which protection mechanism?
A. root protection
B. BPDU protection
C. loop protection
D. RSTP protection
Answer: C

Juniper参考書   JN0-343   JN0-343問題集

NO.27 Which two OSPF LSA types can be used to advertise routes between areas? (Choose two.)
A. router
B. network
C. external
D. summary
Answer: C,D

Juniper認定資格   JN0-343   JN0-343過去問   JN0-343認証試験

NO.28 Which command correctly assigns AS 65432 as the local router's autonomous system?
A. set protocols bgp local-as 65432
B. set routing-options local-as 65432
C. set protocols bgp autonomous-system 65432
D. set routing-options autonomous-system 65432
Answer: D

Juniper問題集   JN0-343   JN0-343

NO.29 Which configuration disables a port when more than 30,000 Kbps of broadcast traffic is received over
an aggregated Ethernet interface with two member links?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C

Juniper参考書   JN0-343認証試験   JN0-343練習問題   JN0-343   JN0-343   JN0-343過去問

NO.30 An administrator finds that traffic from a large file download over an HTTP session is not load-balanced
across multiple links in a LAG. What is the possible cause?
A. Per-packet load-balancing is not configured.
B. The redundant path has a different IGP metric.
C. The hash key is not configured in the forwarding-options stanza.
D. This is the expected behavior.
Answer: D

Juniper   JN0-343練習問題   JN0-343   JN0-343認定試験   JN0-343   JN0-343認証試験

2014年2月17日星期一

Juniper JN0-332認定試験の例題を体験しよう

IT-Passports.comはJuniperのJN0-332認定試験について開発された問題集がとても歓迎されるのはここで知識を得るだけでなく多くの先輩の経験も得ます。試験に良いの準備と自信がとても必要だと思います。使用して私たちIT-Passports.comが提供した対応性練習問題が君にとってはなかなかよいサイトだと思います。

今の多くのIT者が参加している試験に、JuniperのJN0-332認定試験がとても人気がある一つとして、合格するために豊富な知識と経験が必要です。JuniperのJN0-332認定試験に準備する練習ツールや訓練機関に通学しなればまりませんでしょう。IT-Passports.comは君のもっともよい選択ですよ。多くIT者になりたい方にJuniperのJN0-332認定試験に関する問題集を準備しております。君に短い時間に大量のITの専門知識を補充させています。

試験番号:JN0-332問題集
試験科目:Juniper 「Juniper Networks Certified Internet Specialist, SEC (JNCIS-SEC)」
問題と解答:全406問

JuniperのJN0-332認定試験の最新教育資料はIT-Passports.comの専門チームが研究し続けてついに登場し、多くの人の夢が実現させることができます。今のIT業界の中で、自分の地位を固めたくて知識と情報技術を証明したいのもっとも良い方法がJuniperのJN0-332認定試験でございます。がJuniperのJN0-332認定試験の合格書を取ったら仕事の上で大きな変化をもたらします。

IT-Passports.comというサイトには全的な資源とJuniperのJN0-332の試験問題があります。それに、JuniperのJN0-332の試験の実践経験やテストダンプにも含まれています。IT-Passports.comは受験生たちを助けて試験の準備をして、試験に合格するサイトですから、受験生のトレーニングにいろいろな便利を差し上げます。あなたは一部の試用問題と解答を無料にダウンロードすることができます。IT-Passports.comのJuniperのJN0-332の試験中に絶対な方法で転送することでなく、IT-Passports.comは真実かつ全面的な試験問題と解答を提供していますから、当社がオンラインするユニークなのJuniperのJN0-332の試験トレーニング資料を利用したら、あなたが気楽に試験に合格することができるようになります。IT-Passports.comは合格率が100パーセントということを保証します。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/JN0-332.html

NO.1 Which zone is system-defined?
A. security
B. functional
C. junos-global
D. management
Answer: C

Juniper過去問   JN0-332問題集   JN0-332   JN0-332認証試験   JN0-332練習問題

NO.2 Which two statements regarding external authentication servers for firewall user authentication are
true? (Choose two.)
A. Up to three external authentication server types can be used simultaneously.
B. Only one external authentication server type can be used simultaneously.
C. If the local password database is not configured in the authentication order, and the configured
authentication server is unreachable, authentication is bypassed.
D. If the local password database is not configured in the authentication order, and the configured
authentication server rejects the authentication request, authentication is rejected.
Answer: B,D

Juniper認定資格   JN0-332認証試験   JN0-332   JN0-332認定試験

NO.3 Click the Exhibit button.
Your IKE SAs are up, but the IPsec SAs are not up.Referring to the exhibit, what is the problem?
A. One or more of the phase 2 proposals such as authentication algorithm, encryption algorithm do not
match.
B. The tunnel interface is down.
C. The proxy IDs do not match.
D. The IKE proposals do not match the IPsec proposals.
Answer: C

Juniper   JN0-332   JN0-332   JN0-332

NO.4 Which command do you use to display the status of an antivirus database update?
A. show security utm anti-virus status
B. show security anti-virus database status
C. show security utm anti-virus database
D. show security utm anti-virus update
Answer: A

Juniper   JN0-332参考書   JN0-332   JN0-332認定試験

NO.5 Regarding content filtering, what are two pattern lists that can be configured in the Junos OS? (Choose
two.)
A. protocol list
B. MIME
C. block list
D. extension
Answer: B,D

Juniper認定証   JN0-332   JN0-332

NO.6 Click the Exhibit button.
You need to alter the security policy shown in the exhibit to send matching traffic to an IPsec VPN tunnel.
Which command causes traffic to be sent through an IPsec VPN named remote-vpn.?
A. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then tunnel remote-vpn
B. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then tunnel ipsec-vpn remote-vpn
C. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then permit ipsec-vpn remote-vpn
D. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then permit tunnel ipsec-vpn remote-vpn
Answer: D

Juniper   JN0-332   JN0-332認定証   JN0-332   JN0-332認定試験

NO.7 Which two statements regarding symmetric key encryption are true? (Choose two.)
A. The same key is used for encryption and decryption.
B. It is commonly used to create digital certificate signatures.
C. It uses two keys: one for encryption and a different key for decryption.
D. An attacker can decrypt data if the attacker captures the key used for encryption.
Answer: A,D

Juniper認定証   JN0-332認定試験   JN0-332   JN0-332参考書

NO.8 Which three statements are true regarding IDP? (Choose three.)
A. IDP cannot be used in conjunction with other Junos security features such as SCREEN options, zones,
and security policy.
B. IDP inspects traffic up to the Application Layer.
C. IDP searches the data stream for specific attack patterns.
D. IDP inspects traffic up to the Presentation Layer.
E. IDP can drop packets, close sessions, prevent future sessions, and log attacks for review by network
administrators when an attack is detected.
Answer: B,C,E

Juniper   JN0-332問題集   JN0-332認証試験   JN0-332   JN0-332

NO.9 Which three security concerns can be addressed by a tunnel mode IPsec VPN secured by AH?
(Choose three.)
A. data integrity
B. data confidentiality
C. data authentication
D. outer IP header confidentiality
E. outer IP header authentication
Answer: A,C,E

Juniper   JN0-332認証試験   JN0-332   JN0-332

NO.10 Which statement contains the correct parameters for a route-based IPsec VPN?
A. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
interface ge-0/0/1.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
B. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
interface st0.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
C. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
bind-interface ge-0/0/1.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
D. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
bind-interface st0.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
Answer: D

Juniper   JN0-332   JN0-332問題集   JN0-332

NO.11 You want to allow your device to establish OSPF adjacencies with a neighboring device connected to
interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration
hierarchy must you permit OSPF traffic?
A. [edit security policies from-zone HR to-zone HR]
B. [edit security zones functional-zone management protocols]
C. [edit security zones protocol-zone HR host-inbound-traffic]
D. [edit security zones security-zone HR host-inbound-traffic protocols]
Answer: D

Juniper   JN0-332認証試験   JN0-332

NO.12 Which security or functional zone name has special significance to the Junos OS?
A. self
B. trust
C. untrust
D. junos-global
Answer: D

Juniper参考書   JN0-332   JN0-332参考書   JN0-332

NO.13 Which type of Web filtering by default builds a cache of server actions associated with each URL it has
checked?
A. Websense Redirect Web filtering
B. integrated Web filtering
C. local Web filtering
D. enhanced Web filtering
Answer: B

Juniper参考書   JN0-332練習問題   JN0-332認定試験   JN0-332認定証   JN0-332参考書

NO.14 You must configure a SCREEN option that would protect your router from a session table flood.Which
configuration meets this requirement?
A. [edit security screen]
user@host# show
ids-option protectFromFlood
{
icmp
{
ip-sweep threshold 5000;
flood threshold 2000;
}
}
B. [edit security screen]
user@host# show
ids-option protectFromFlood
{
tcp
{
syn-flood
{
attack-threshold 2000;
destination-threshold 2000;
}
}
}
C. [edit security screen]
user@host# show
ids-option protectFromFlood
{
udp
{
flood threshold 5000;
}
}
D. [edit security screen]
user@host# show
ids-option protectFromFlood
{
limit-session
{
source-ip-based 1200;
destination-ip-based 1200;
}
}
Answer: D

Juniper認証試験   JN0-332問題集   JN0-332   JN0-332   JN0-332認証試験

NO.15 Click the Exhibit button.
System services SSH, Telnet, FTP, and HTTP are enabled on the SRX Series device.
Referring to the configuration shown in the exhibit, which two statements are true? (Choose two.)
A. A user can use SSH to interface ge-0/0/0.0 and ge-0/0/1.0.
B. A user can use FTP to interface ge-0/0/0.0 and ge-0/0/1.0.
C. A user can use SSH to interface ge-0/0/0.0.
D. A user can use SSH to interface ge-0/0/1.0.
Answer: B,C

Juniper認定資格   JN0-332   JN0-332過去問   JN0-332

NO.16 Which UTM feature requires a license to function?
A. integrated Web filtering
B. local Web filtering
C. redirect Web filtering
D. content filtering
Answer: A

Juniper   JN0-332練習問題   JN0-332認定資格   JN0-332

NO.17 Which two statements are true about hierarchical architecture? (Choose two.)
A. You can assign a logical interface to multiple zones.
B. You cannot assign a logical interface to multiple zones.
C. You can assign a logical interface to multiple routing instances.
D. You cannot assign a logical interface to multiple routing instances.
Answer: B,D

Juniper   JN0-332認定証   JN0-332   JN0-332   JN0-332参考書

NO.18 Which configuration keyword ensures that all in-progress sessions are re-evaluated upon committing a
security policy change?
A. policy-rematch
B. policy-evaluate
C. rematch-policy
D. evaluate-policy
Answer: A

Juniper   JN0-332練習問題   JN0-332認定資格

NO.19 Click the Exhibit button.
In the exhibit, a new policy named DenyTelnet was created. You notice that Telnet traffic is still allowed.
Which statement will allow you to rearrange the policies for the DenyTelnet policy to be evaluated before
your Allow policy?
A. insert security policies from-zone A to-zone B policy DenyTelnet before policy Allow
B. set security policies from-zone B to-zone A policy DenyTelnet before policy Allow
C. insert security policies from-zone A to-zone B policy DenyTelnet after policy Allow
D. set security policies from-zone B to-zone A policy Allow after policy DenyTelnet
Answer: A

Juniper認定試験   JN0-332認定証   JN0-332認証試験

NO.20 A user wants to establish an HTTP session to a server behind an SRX device but is being pointed to
Web page on the SRX device for additional authentication.Which type of user authentication is
configured?
A. pass-through with Web redirect
B. WebAuth with HTTP redirect
C. WebAuth
D. pass-through
Answer: A

Juniper認定資格   JN0-332練習問題   JN0-332

JuniperのJN0-332の認定試験に合格すれば、就職機会が多くなります。この試験に合格すれば君の専門知識がとても強いを証明し得ます。JuniperのJN0-332の認定試験は君の実力を考察するテストでございます。

2013年8月13日星期二

JuniperのJN0-643 JN0-632 JN0-660 JN0-332 JN0-101 JN0-360認定試験の最新な問題集

IT-Passports.comの専門家チームが君の需要を満たすために自分の経験と知識を利用してJuniperJN0-643 JN0-632 JN0-660 JN0-332 JN0-101 JN0-360認定試験対策模擬テスト問題集が研究しました。模擬テスト問題集と真実の試験問題がよく似ています。一目でわかる最新の出題傾向でわかりやすい解説と充実の補充問題があります。


「私はだめです。」という話を永遠に言わないでください。これは皆さんのためのアドバイスです。難しいJuniperのJN0-643 JN0-632 JN0-660 JN0-332 JN0-101 JN0-360認定試験に合格する能力を持たないと思っても、あなたは効率的な骨の折れないトレーニングツールを選んで試験に合格させることができます。IT-Passports.comのJuniperのJN0-643 JN0-632 JN0-660 JN0-332 JN0-101 JN0-360試験トレーニング資料はとても良いトレーニングツールで、100パーセントの合格率を保証します。それに、資料の値段は手頃です。IT-Passports.comを利用したらあなたはきっと大いに利益を得ることができます。ですから、「私はだめです。」という話を言わないでください。諦めないのなら、希望が現れています。あなたの希望はIT-Passports.comのJuniperのJN0-643 JN0-632 JN0-660 JN0-332 JN0-101 JN0-360試験トレーニング資料にありますから、速く掴みましょう。


IT-Passports.comはたくさんIT関連認定試験の受験者に利便性を提供して、多くの人がIT-Passports.comの問題集を使うので試験に合格しますた。彼らはIT-Passports.comの問題集が有効なこと確認しました。IT-Passports.comが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。


IT-Passports.comが提供した研修ツールはJuniperのJN0-643 JN0-632 JN0-660 JN0-332 JN0-101 JN0-360の認定試験に向けて学習資料やシミュレーション訓練宿題で、重要なのは試験に近い練習問題と解答を提供いたします。IT-Passports.com を選ばれば短時間にITの知識を身につけることができて、高い点数をとられます。


試験番号:JN0-643問題集

試験科目:Juniper 「Enterprise Routing and Switching, Professional (JNCIP-ENT)」

問題と解答:全114問

試験番号:JN0-632問題集

試験科目:Juniper 「Juniper Networks Certified Internet Professional, Security (JNCIP-SEC)」

問題と解答:全169問

試験番号:JN0-660問題集

試験科目:Juniper 「Service Provider Routing and Switching, Professional」

問題と解答:全171問

試験番号:JN0-332問題集

試験科目:Juniper 「Juniper Networks Certified Internet Specialist, SEC (JNCIS-SEC)」

問題と解答:全406問

試験番号:JN0-101問題集

試験科目:Juniper 「JNCIA-JUNOS EXAM OBJECTIVES」

問題と解答:全190問

試験番号:JN0-360問題集

試験科目:Juniper 「Juniper Networks Certified Internet Specialist (JNCIS-SP)」

問題と解答:全143問

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/JN0-643.html


NO.1 What is the default LLDP timeout?
A. 60 seconds
B. 90 seconds
C. 120 seconds
D. infinite
Answer: C

Juniper   JN0-643認定証   JN0-643認証試験   JN0-643

NO.2 Click the Exhibit button.
In the exhibit, which statement about the ABR between Area 8 and Area 2 is true?
A. The router has connectivity to all areas.
B. The router has connectivity to Area 8 only.
C. The router has connectivity to Area 2 only.
D. The router has connectivity to all routers in Area 8 and Area 2.
Answer: D

Juniper認定試験   JN0-643   JN0-643   JN0-643   JN0-643練習問題

NO.3 Which two LSA types are only generated by an ABR router? (Choose two.)
A. ASBR summary LSA (Type 4)
B. ASBR LSA (Type 5)
C. Summary LSA (Type 3)
D. Router LSA (Type 1)
Answer: A,C

Juniper問題集   JN0-643認定試験   JN0-643過去問   JN0-643参考書   JN0-643参考書

NO.4 If your WAN-edge router is multihomed to different ISPs, which two BGP attributes would you modify to
affect outbound traffic? (Choose two.)
A. MED
B. origin
C. local preference
D. community
Answer: B,C

Juniper問題集   JN0-643   JN0-643認証試験   JN0-643問題集

NO.5 A medium-sized enterprise has some devices that are 802.1X capable and some that are not. Any
device that fails authentication must be provided limited access through a VLAN called NONAUTH. How
do you provide this access?
A. Configure NONAUTH VLAN as the guest VLAN.
B. Configure NONAUTH VLAN as the server-reject VLAN.
C. Configure NONAUTH VLAN as the guest VLAN and the server-reject VLAN
D. Configure a separate VLAN for each type of user: 802.1X and non-802.1X.
Answer: C

Juniper   JN0-643認定試験   JN0-643

NO.6 A user complains about connectivity problems from their IP address (10.1.1.87) to a server
(10.65.1.100).Which Junos command can help verify connectivity in the network? (Choose two.)
A. mroute
B. traceoptions
C. ping
D. clear bgp neighbor
Answer: B,C

Juniper参考書   JN0-643   JN0-643認定試験   JN0-643

NO.7 Click the Exhibit button.
The exhibit shows the output of an OSPF router LSA.
Which interface ID represents the router's loopback address?
A. ID 10.1.1.0
B. ID 10.0.3.4
C. ID 10.0.3.3
D. ID 10.0.2.4
Answer: B

Juniper認証試験   JN0-643参考書   JN0-643認定試験   JN0-643参考書   JN0-643

NO.8 Click the Exhibit button.
A user on port ge-0/0/12 fails an 802.1x authentication attempt.
What is the next action of Switch A?
A. It puts the Authenticator in the HELD status where all EAPOL packets are discarded until the default
hold timer expires.
B. It communicates with the RADIUS server to confirm the user's password.
C. It transmits an EAP-Identity-Request packet immediately after it sends out EAP-Failure.
D. It tries to authenticate the user using MAC radius authentication.
Answer: C

Juniper認定証   JN0-643認定試験   JN0-643   JN0-643   JN0-643認定証   JN0-643練習問題

NO.9 Click the Exhibit button.
Based on the output shown in the exhibit, which protocol is configured?
A. MSTP
B. RSTP
C. STP
D. VSTP
Answer: D

Juniper   JN0-643   JN0-643

NO.10 Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the SRX
Series platform.?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C

Juniper   JN0-643   JN0-643

NO.11 Click the Exhibit button.
Host 1, Host 2, and Host 3 are connected to Switch A on interface ge-0/0/2. Host 1 and Host 2 have been
authenticated through 802.1X, however Host 3 does not have an 802.1X supplicant.
Referring to the configuration in the exhibit, how can Host 3 be authenticated?
A. secure-authentication option of HTTP or HTTPS must be configured for Captive Portal.
B. MAC RADIUS authentication must be configured for Host 3 instead of Captive Portal.
C. A new authentication-profile must be configured because 802.1X and Captive Portal cannot have the
same authentication-profile.
D. The 802.1X server failback feature must be configured for Host 3 to allow non-802.1X clients to
authenticate.
Answer: B

Juniper認証試験   JN0-643認定資格   JN0-643認定資格   JN0-643参考書

NO.12 When 802.1X, MAC-RADIUS, and Captive Portal are enabled on an interface, which
authentication sequence occurs?
A. The authentication sequence is based on the order of the configuration.
B. If MAC-RADIUS is rejected, Captive Portal will start. If Captive portal is timed out, 802.1X will start.
C. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is timed out by the RADIUS server,
then Captive Portal will start.
D. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is rejected by the RADIUS server,
then Captive Portal will start.
Answer: D

Juniper参考書   JN0-643   JN0-643

NO.13 Click the Exhibit button.
Referring to the output in the exhibit, why does the router prefer the path toward interface ge0/0/0.0 for the
20.0.0.0/8 route?
A. The origin is IGP.
B. The origin is unknown.
C. The AS path is longer.
D. Multihop is enabled.
Answer: A

Juniper認証試験   JN0-643認定資格   JN0-643練習問題

NO.14 Port authentication falls back to Captive Portal. In which two scenarios would the port
authentication move back to 802.1X? (Choose two.)
A. if any MAC RADIUS request packet is received on the interface and if there are no sessions in
authenticated/authenticating state
B. if Captive Portal is deactivated on the interface
C. if the user gets logged out
D. if the EAP packet is received on the interface and if there are no sessions in
authenticated/authenticating state
Answer: B,D

Juniper練習問題   JN0-643   JN0-643参考書   JN0-643

NO.15 Click the Exhibit button.
Based on the output shown in the exhibit, why is VSTP not working for VLAN 100?
A. No interfaces are assigned to VLAN 100.
B. Your MSTI is misconfigured.
C. RSTP is configured in addition to VSTP.
D. No native VLAN is configured.
Answer: A

Juniper   JN0-643   JN0-643認証試験   JN0-643認定資格   JN0-643問題集