Juniper JN0-370 JN0-355 JN0-314 JN0-643 JN0-632認定試験で困っているのか

成功した方法を見つけるだけで、失敗の言い訳をしないでください。JuniperのJN0-370 JN0-355 JN0-314 JN0-643 JN0-632試験に受かるのは実際にそんなに難しいことではないです。大切なのはあなたがどんな方法を使うかということです。IT-Passports.comのJuniperのJN0-370 JN0-355 JN0-314 JN0-643 JN0-632試験トレーニング資料はよい選択で、あなたが首尾よく試験に合格することを助けられます。これも成功へのショートカットです。誰もが成功する可能性があって、大切なのは選択することです。

IT-Passports.comはIT試験問題集を提供するウエブダイトで、ここによく分かります。最もよくて最新で資料を提供いたします。こうして、君は安心で試験の準備を行ってください。弊社の資料を使って、１００％に合格を保証いたします。もし合格しないと、われは全額で返金いたします。

試験番号：JN0-370問題集
試験科目：Juniper 「QFabric, Specialist (JNCIS-QF)」
問題と解答：全108問

試験番号：JN0-355問題集
試験科目：Juniper 「Junos Pulse Secure Access, Specialist (JNCIS-SA)」
問題と解答：全115問

試験番号：JN0-314問題集
試験科目：Juniper 「Junos Pulse Access Control, Specialist (JNCIS-AC)」
問題と解答：全222問

試験番号：JN0-643問題集
試験科目：Juniper 「Enterprise Routing and Switching, Professional (JNCIP-ENT)」
問題と解答：全201問

試験番号：JN0-632問題集
試験科目：Juniper 「Juniper Networks Certified Internet Professional, Security (JNCIP-SEC)」
問題と解答：全169問

IT-Passports.comはJuniperのJN0-370 JN0-355 JN0-314 JN0-643 JN0-632認定試験にたいして短期で有効なウェブサイトでJN0-370 JN0-355 JN0-314 JN0-643 JN0-632認定試験に合格するのを保証したり、Juniper認証試験に合格しなければ全額で返金いたします。あなたはIT-Passports.comが提供したJN0-370 JN0-355 JN0-314 JN0-643 JN0-632の認証試験の問題集を購入するの前にインターネットで無料な試用版をダウンロードしてください。

IT-Passports.comが提供したJuniperのJN0-370 JN0-355 JN0-314 JN0-643 JN0-632トレーニング資料を持っていたら、美しい未来を手に入れるということになります。IT-Passports.comが提供したJuniperのJN0-370 JN0-355 JN0-314 JN0-643 JN0-632トレーニング資料はあなたの成功への礎になれることだけでなく、あなたがIT業種でもっと有効な能力を発揮することも助けられます。このトレーニングはカバー率が高いですから、あなたの知識を豊富させる以外、操作レベルを高められます。もし今あなたがJuniperのJN0-370 JN0-355 JN0-314 JN0-643 JN0-632試験にどうやって合格することに困っているのなら、心配しないでください。IT-Passports.comが提供したJuniperのJN0-370 JN0-355 JN0-314 JN0-643 JN0-632トレーニング資料はあなたの問題を解決することができますから。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/JN0-643.html

NO.1 A network routes IPv4 traffic only. You want to add IPv6 to the network, but you must use a
single IGP for both IPv4 and IPv6 traffic.
Which protocol meets this requirement?
A. OSPFv2
B. BGPv4
C. ES-ISv1
D. OSPFv3
Answer: D

Juniper認証試験   JN0-643認定試験   JN0-643   JN0-643

NO.2 A user complains about connectivity problems from their IP address (10.1.1.87) to a server
(10.65.1.100).
Which Junos command can help verify connectivity in the network?
A. mroute
B. traceoptions
C. ping
D. clear bgp neighbor
Answer: C

Juniper認証試験   JN0-643   JN0-643   JN0-643   JN0-643参考書

NO.3 Which option is a valid IPv6 multicast address?
A. fe80::205:8640:471:3200/ 64
B. ::172.16.0.5 /126
C. ff03:365:ba::23
D. ff01:cgfc:345:22::226:8ff:fee4:bf6f
Answer: C

Juniper参考書   JN0-643   JN0-643認定試験   JN0-643   JN0-643認証試験

NO.4 During the BGP route-resolution process, the Junos OS must calculate the appropriate
next-hop based on the BGP protocol next-hop attribute.
Which two routing tables are checked during this process in a default Junos configuration? (Choose
two.)
A. inet.0
B. inet.1
C. inet.2
D. inet.3
Answer: A,D

Juniper   JN0-643   JN0-643   JN0-643認定試験

NO.5 You are implementing MSTP in your network.
Which three values must match on all switches within the MST region? (Choose three)
A. Context identifier
B. Region name
C. VLANs
D. Revision
E. Configuration manifest
Answer: B,C,D

Juniper過去問   JN0-643   JN0-643認定証   JN0-643   JN0-643認定試験   JN0-643

NO.6 Port authentication falls back to Captive Portal.
In which two scenarios would the port authentication move back to 802.1X? (Choose two.)
A. if any MAC RADIUS request packet is received on the interface and if there are no sessions in
authenticated/authenticating state
B. if Captive Portal is deactivated on the interface
C. if the user gets logged out
D. if the EAP packet is received on the interface and if there are no sessions in
authenticated/authenticating state
Answer: B,D

Juniper参考書   JN0-643   JN0-643練習問題   JN0-643過去問

NO.7 Which protocol reachability is advertised by OSPFv2?
A. IPv4
B. IPv5
C. IPv6
D. ISO
Answer: A

Juniper参考書   JN0-643練習問題   JN0-643   JN0-643問題集

NO.8 You have implemented 802.1X authentication in your Layer 2 network and you have only a
single RADIUS server. You are asked to ensure that if the RADIUS server becomes unreachable or
fails, users connected to the ge-0/ 0/ 0 port are still able to reach the Internet using a predefined
guest VLAN.
Which command allows this access?
A. [edit]
user@switch# set protocols dot1x authenticator interface ge-0/ 0/ 0.0 radius-fail vlan guest
B. [edit]
user@switch# set protocols dot1x authenticator interface ge-0/ 0/ 0.0 server-fail vlan-name guest
C. [edit]
user@switch# set protocols dot1x authenticator interface ge-0/ 0/ 0.0 auth-fail assign-vlan guest
D. [edit]
user@switch# set protocols dot1x authenticator interface ge-0/ 0/ 0.0 radius-fail assign guest
Answer: B

Juniper認定資格   JN0-643   JN0-643認定資格   JN0-643

NO.9 A Layer 2 forwarding loop occurred on your network during a scheduled maintenance period.
You must prevent this behavior in the future.
Which protocol should you enable on the EX Series switch to address this condition in the future?
A. DVMRP
B. L2TPv3
C. STP
D. RSVP
Answer: C

Juniper問題集   JN0-643   JN0-643

NO.10 You are AS 6573.
Which AS path regular expression matches only routes originated in your AS?
A. "6573.*"
B. ".*"
C. "{"
D. "

最高のJuniperのJN0-355 JN0-314 JN0-643 JN0-632認定試験問題集

IT-Passports.comあなたに 最高のJuniperのJN0-355 JN0-314 JN0-643 JN0-632試験問題集を提供して差し上げます。あなたを成功への道に引率します。IT-Passports.comのJuniperのJN0-355 JN0-314 JN0-643 JN0-632試験トレーニング資料は試験の準備をしているあなたにヘルプを与えます。当社の資料はあなたがIT専門家になるように特別に受験生の皆さんのために作成したものです。IT-Passports.comのJuniperのJN0-355 JN0-314 JN0-643 JN0-632試験トレーニング資料はあなたに最も適用して、あなたのニーズを満たす資料です。はやくIT-Passports.comのサイトを登録してくだい。きっと棚ぼたがありますよ。

進歩を勇敢に追及する人生こそ素晴らしい人生です。未来のある日、椅子で休むとき、自分の人生を思い出したときに笑顔が出たら成功な人生になります。あなたは成功な人生がほしいですか。そうしたいのなら、速くIT-Passports.comのJuniperのJN0-355 JN0-314 JN0-643 JN0-632試験トレーニング資料を利用してください。これはIT認証試験を受ける皆さんのために特別に研究されたもので、１００パーセントの合格率を保証できますから、躊躇わずに購入しましょう。

JuniperのJN0-355 JN0-314 JN0-643 JN0-632試験にもっと首尾よく合格したいのですか。そうしたら速くIT-Passports.comを選びましょう。IT-Passports.comは様々なIT認証試験を受ける人々に正確な試験資料を提供するサイトです。IT-Passports.comはIT職員としてのあなたに昇進するチャンスを与えられます。IT-Passports.com が提供したJuniperのJN0-355 JN0-314 JN0-643 JN0-632試験に関する一部の無料の問題と解答を利用してみることができます。そうすると、我々の信頼性をテストできます。

君はほかのサイトや書籍もブラウズ するがもしれませんが、弊社の関連の学習資料と比較してからIT-Passports.comの商品の範囲が広くてまたネット上でダウンロードを発見してしまいました。IT-Passports.comだけ全面と高品質の問題集があるのではIT-Passports.comの専門家チームが彼らの長年のIT知識と豊富な経験で研究してしました。そして、IT-Passports.comに多くの受験生の歓迎されます。

IT-Passports.comのJuniperのJN0-355 JN0-314 JN0-643 JN0-632の試験問題と解答はあなたが受験する前にすべての必要とした準備資料を提供しています。JuniperのJN0-355 JN0-314 JN0-643 JN0-632の認証試験について、あなたは異なるサイトや書籍で色々な問題を見つけることができます。しかし、ロジックが接続されているかどうかはキーです。IT-Passports.comの問題と解答は初めに試験を受けるあなたが気楽に成功することを助けるだけではなく、あなたの貴重な時間を節約することもできます。

試験番号：JN0-355問題集

試験科目：Juniper 「Junos Pulse Secure Access, Specialist (JNCIS-SA)」

問題と解答：全115問

試験番号：JN0-314問題集

試験科目：Juniper 「Junos Pulse Access Control, Specialist (JNCIS-AC)」

問題と解答：全115問

試験番号：JN0-643問題集

試験科目：Juniper 「Enterprise Routing and Switching, Professional (JNCIP-ENT)」

問題と解答：全114問

試験番号：JN0-632問題集

試験科目：Juniper 「Juniper Networks Certified Internet Professional, Security (JNCIP-SEC)」

問題と解答：全169問

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/JN0-643.html

NO.1 A user complains about connectivity problems from their IP address (10.1.1.87) to a server
(10.65.1.100).Which Junos command can help verify connectivity in the network? (Choose two.)
A. mroute
B. traceoptions
C. ping
D. clear bgp neighbor
Answer: B,C

Juniper参考書   JN0-643認定証   JN0-643

NO.2 Click the Exhibit button.
A user on port ge-0/0/12 fails an 802.1x authentication attempt.
What is the next action of Switch A?
A. It puts the Authenticator in the HELD status where all EAPOL packets are discarded until the default
hold timer expires.
B. It communicates with the RADIUS server to confirm the user's password.
C. It transmits an EAP-Identity-Request packet immediately after it sends out EAP-Failure.
D. It tries to authenticate the user using MAC radius authentication.
Answer: C

Juniper問題集   JN0-643認定試験   JN0-643   JN0-643認定資格

NO.3 Click the Exhibit button.
The exhibit shows the output of an OSPF router LSA.
Which interface ID represents the router's loopback address?
A. ID 10.1.1.0
B. ID 10.0.3.4
C. ID 10.0.3.3
D. ID 10.0.2.4
Answer: B

Juniper   JN0-643   JN0-643認証試験

NO.4 Click the Exhibit button.
Based on the output shown in the exhibit, which protocol is configured?
A. MSTP
B. RSTP
C. STP
D. VSTP
Answer: D

Juniper   JN0-643   JN0-643   JN0-643

NO.5 Port authentication falls back to Captive Portal. In which two scenarios would the port
authentication move back to 802.1X? (Choose two.)
A. if any MAC RADIUS request packet is received on the interface and if there are no sessions in
authenticated/authenticating state
B. if Captive Portal is deactivated on the interface
C. if the user gets logged out
D. if the EAP packet is received on the interface and if there are no sessions in
authenticated/authenticating state
Answer: B,D

Juniper   JN0-643過去問   JN0-643   JN0-643

NO.6 Click the Exhibit button.
In the exhibit, which statement about the ABR between Area 8 and Area 2 is true?
A. The router has connectivity to all areas.
B. The router has connectivity to Area 8 only.
C. The router has connectivity to Area 2 only.
D. The router has connectivity to all routers in Area 8 and Area 2.
Answer: D

Juniper参考書   JN0-643   JN0-643認定資格   JN0-643問題集   JN0-643問題集

NO.7 When 802.1X, MAC-RADIUS, and Captive Portal are enabled on an interface, which
authentication sequence occurs?
A. The authentication sequence is based on the order of the configuration.
B. If MAC-RADIUS is rejected, Captive Portal will start. If Captive portal is timed out, 802.1X will start.
C. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is timed out by the RADIUS server,
then Captive Portal will start.
D. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is rejected by the RADIUS server,
then Captive Portal will start.
Answer: D

Juniper過去問   JN0-643過去問   JN0-643過去問   JN0-643   JN0-643練習問題

NO.8 What is the default LLDP timeout?
A. 60 seconds
B. 90 seconds
C. 120 seconds
D. infinite
Answer: C

Juniper   JN0-643   JN0-643認証試験   JN0-643認定試験

NO.9 Click the Exhibit button.
Referring to the output in the exhibit, why does the router prefer the path toward interface ge0/0/0.0 for the
20.0.0.0/8 route?
A. The origin is IGP.
B. The origin is unknown.
C. The AS path is longer.
D. Multihop is enabled.
Answer: A

Juniper問題集   JN0-643   JN0-643過去問

NO.10 If your WAN-edge router is multihomed to different ISPs, which two BGP attributes would you modify to
affect outbound traffic? (Choose two.)
A. MED
B. origin
C. local preference
D. community
Answer: B,C

Juniper参考書   JN0-643問題集   JN0-643   JN0-643   JN0-643認定試験

NO.11 A medium-sized enterprise has some devices that are 802.1X capable and some that are not. Any
device that fails authentication must be provided limited access through a VLAN called NONAUTH. How
do you provide this access?
A. Configure NONAUTH VLAN as the guest VLAN.
B. Configure NONAUTH VLAN as the server-reject VLAN.
C. Configure NONAUTH VLAN as the guest VLAN and the server-reject VLAN
D. Configure a separate VLAN for each type of user: 802.1X and non-802.1X.
Answer: C

Juniper認定資格   JN0-643   JN0-643認定証

NO.12 Click the Exhibit button.
Based on the output shown in the exhibit, why is VSTP not working for VLAN 100?
A. No interfaces are assigned to VLAN 100.
B. Your MSTI is misconfigured.
C. RSTP is configured in addition to VSTP.
D. No native VLAN is configured.
Answer: A

Juniper認定証   JN0-643認定試験   JN0-643認証試験

NO.13 Which two LSA types are only generated by an ABR router? (Choose two.)
A. ASBR summary LSA (Type 4)
B. ASBR LSA (Type 5)
C. Summary LSA (Type 3)
D. Router LSA (Type 1)
Answer: A,C

Juniper問題集   JN0-643   JN0-643練習問題   JN0-643

NO.14 Click the Exhibit button.
Host 1, Host 2, and Host 3 are connected to Switch A on interface ge-0/0/2. Host 1 and Host 2 have been
authenticated through 802.1X, however Host 3 does not have an 802.1X supplicant.
Referring to the configuration in the exhibit, how can Host 3 be authenticated?
A. secure-authentication option of HTTP or HTTPS must be configured for Captive Portal.
B. MAC RADIUS authentication must be configured for Host 3 instead of Captive Portal.
C. A new authentication-profile must be configured because 802.1X and Captive Portal cannot have the
same authentication-profile.
D. The 802.1X server failback feature must be configured for Host 3 to allow non-802.1X clients to
authenticate.
Answer: B

Juniper   JN0-643   JN0-643認定資格   JN0-643

NO.15 Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the SRX
Series platform.?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C

Juniper   JN0-643過去問   JN0-643   JN0-643

JuniperのJN0-643 JN0-632 JN0-660 JN0-332 JN0-101 JN0-360認定試験の最新な問題集

IT-Passports.comの専門家チームが君の需要を満たすために自分の経験と知識を利用してJuniperのJN0-643 JN0-632 JN0-660 JN0-332 JN0-101 JN0-360認定試験対策模擬テスト問題集が研究しました。模擬テスト問題集と真実の試験問題がよく似ています。一目でわかる最新の出題傾向でわかりやすい解説と充実の補充問題があります。

「私はだめです。」という話を永遠に言わないでください。これは皆さんのためのアドバイスです。難しいJuniperのJN0-643 JN0-632 JN0-660 JN0-332 JN0-101 JN0-360認定試験に合格する能力を持たないと思っても、あなたは効率的な骨の折れないトレーニングツールを選んで試験に合格させることができます。IT-Passports.comのJuniperのJN0-643 JN0-632 JN0-660 JN0-332 JN0-101 JN0-360試験トレーニング資料はとても良いトレーニングツールで、１００パーセントの合格率を保証します。それに、資料の値段は手頃です。IT-Passports.comを利用したらあなたはきっと大いに利益を得ることができます。ですから、「私はだめです。」という話を言わないでください。諦めないのなら、希望が現れています。あなたの希望はIT-Passports.comのJuniperのJN0-643 JN0-632 JN0-660 JN0-332 JN0-101 JN0-360試験トレーニング資料にありますから、速く掴みましょう。

IT-Passports.comはたくさんIT関連認定試験の受験者に利便性を提供して、多くの人がIT-Passports.comの問題集を使うので試験に合格しますた。彼らはIT-Passports.comの問題集が有効なこと確認しました。IT-Passports.comが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。

IT-Passports.comが提供した研修ツールはJuniperのJN0-643 JN0-632 JN0-660 JN0-332 JN0-101 JN0-360の認定試験に向けて学習資料やシミュレーション訓練宿題で、重要なのは試験に近い練習問題と解答を提供いたします。IT-Passports.com を選ばれば短時間にITの知識を身につけることができて、高い点数をとられます。

試験番号：JN0-643問題集

試験科目：Juniper 「Enterprise Routing and Switching, Professional (JNCIP-ENT)」

問題と解答：全114問

試験番号：JN0-632問題集

試験科目：Juniper 「Juniper Networks Certified Internet Professional, Security (JNCIP-SEC)」

問題と解答：全169問

試験番号：JN0-660問題集

試験科目：Juniper 「Service Provider Routing and Switching, Professional」

問題と解答：全171問

試験番号：JN0-332問題集

試験科目：Juniper 「Juniper Networks Certified Internet Specialist, SEC (JNCIS-SEC)」

問題と解答：全406問

試験番号：JN0-101問題集

試験科目：Juniper 「JNCIA-JUNOS EXAM OBJECTIVES」

問題と解答：全190問

試験番号：JN0-360問題集

試験科目：Juniper 「Juniper Networks Certified Internet Specialist (JNCIS-SP)」

問題と解答：全143問

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/JN0-643.html

NO.1 What is the default LLDP timeout?
A. 60 seconds
B. 90 seconds
C. 120 seconds
D. infinite
Answer: C

Juniper   JN0-643認定証   JN0-643認証試験   JN0-643

NO.2 Click the Exhibit button.
In the exhibit, which statement about the ABR between Area 8 and Area 2 is true?
A. The router has connectivity to all areas.
B. The router has connectivity to Area 8 only.
C. The router has connectivity to Area 2 only.
D. The router has connectivity to all routers in Area 8 and Area 2.
Answer: D

Juniper認定試験   JN0-643   JN0-643   JN0-643   JN0-643練習問題

NO.3 Which two LSA types are only generated by an ABR router? (Choose two.)
A. ASBR summary LSA (Type 4)
B. ASBR LSA (Type 5)
C. Summary LSA (Type 3)
D. Router LSA (Type 1)
Answer: A,C

Juniper問題集   JN0-643認定試験   JN0-643過去問   JN0-643参考書   JN0-643参考書

NO.4 If your WAN-edge router is multihomed to different ISPs, which two BGP attributes would you modify to
affect outbound traffic? (Choose two.)
A. MED
B. origin
C. local preference
D. community
Answer: B,C

Juniper問題集   JN0-643   JN0-643認証試験   JN0-643問題集

NO.5 A medium-sized enterprise has some devices that are 802.1X capable and some that are not. Any
device that fails authentication must be provided limited access through a VLAN called NONAUTH. How
do you provide this access?
A. Configure NONAUTH VLAN as the guest VLAN.
B. Configure NONAUTH VLAN as the server-reject VLAN.
C. Configure NONAUTH VLAN as the guest VLAN and the server-reject VLAN
D. Configure a separate VLAN for each type of user: 802.1X and non-802.1X.
Answer: C

Juniper   JN0-643認定試験   JN0-643

NO.6 A user complains about connectivity problems from their IP address (10.1.1.87) to a server
(10.65.1.100).Which Junos command can help verify connectivity in the network? (Choose two.)
A. mroute
B. traceoptions
C. ping
D. clear bgp neighbor
Answer: B,C

Juniper参考書   JN0-643   JN0-643認定試験   JN0-643

NO.7 Click the Exhibit button.
The exhibit shows the output of an OSPF router LSA.
Which interface ID represents the router's loopback address?
A. ID 10.1.1.0
B. ID 10.0.3.4
C. ID 10.0.3.3
D. ID 10.0.2.4
Answer: B

Juniper認証試験   JN0-643参考書   JN0-643認定試験   JN0-643参考書   JN0-643

NO.8 Click the Exhibit button.
A user on port ge-0/0/12 fails an 802.1x authentication attempt.
What is the next action of Switch A?
A. It puts the Authenticator in the HELD status where all EAPOL packets are discarded until the default
hold timer expires.
B. It communicates with the RADIUS server to confirm the user's password.
C. It transmits an EAP-Identity-Request packet immediately after it sends out EAP-Failure.
D. It tries to authenticate the user using MAC radius authentication.
Answer: C

Juniper認定証   JN0-643認定試験   JN0-643   JN0-643   JN0-643認定証   JN0-643練習問題

NO.9 Click the Exhibit button.
Based on the output shown in the exhibit, which protocol is configured?
A. MSTP
B. RSTP
C. STP
D. VSTP
Answer: D

Juniper   JN0-643   JN0-643

NO.10 Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the SRX
Series platform.?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C

Juniper   JN0-643   JN0-643

NO.11 Click the Exhibit button.
Host 1, Host 2, and Host 3 are connected to Switch A on interface ge-0/0/2. Host 1 and Host 2 have been
authenticated through 802.1X, however Host 3 does not have an 802.1X supplicant.
Referring to the configuration in the exhibit, how can Host 3 be authenticated?
A. secure-authentication option of HTTP or HTTPS must be configured for Captive Portal.
B. MAC RADIUS authentication must be configured for Host 3 instead of Captive Portal.
C. A new authentication-profile must be configured because 802.1X and Captive Portal cannot have the
same authentication-profile.
D. The 802.1X server failback feature must be configured for Host 3 to allow non-802.1X clients to
authenticate.
Answer: B

Juniper認証試験   JN0-643認定資格   JN0-643認定資格   JN0-643参考書

NO.12 When 802.1X, MAC-RADIUS, and Captive Portal are enabled on an interface, which
authentication sequence occurs?
A. The authentication sequence is based on the order of the configuration.
B. If MAC-RADIUS is rejected, Captive Portal will start. If Captive portal is timed out, 802.1X will start.
C. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is timed out by the RADIUS server,
then Captive Portal will start.
D. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is rejected by the RADIUS server,
then Captive Portal will start.
Answer: D

Juniper参考書   JN0-643   JN0-643

NO.13 Click the Exhibit button.
Referring to the output in the exhibit, why does the router prefer the path toward interface ge0/0/0.0 for the
20.0.0.0/8 route?
A. The origin is IGP.
B. The origin is unknown.
C. The AS path is longer.
D. Multihop is enabled.
Answer: A

Juniper認証試験   JN0-643認定資格   JN0-643練習問題

NO.14 Port authentication falls back to Captive Portal. In which two scenarios would the port
authentication move back to 802.1X? (Choose two.)
A. if any MAC RADIUS request packet is received on the interface and if there are no sessions in
authenticated/authenticating state
B. if Captive Portal is deactivated on the interface
C. if the user gets logged out
D. if the EAP packet is received on the interface and if there are no sessions in
authenticated/authenticating state
Answer: B,D

Juniper練習問題   JN0-643   JN0-643参考書   JN0-643

NO.15 Click the Exhibit button.
Based on the output shown in the exhibit, why is VSTP not working for VLAN 100?
A. No interfaces are assigned to VLAN 100.
B. Your MSTI is misconfigured.
C. RSTP is configured in addition to VSTP.
D. No native VLAN is configured.
Answer: A

Juniper   JN0-643   JN0-643認証試験   JN0-643認定資格   JN0-643問題集